On Tue, Jun 20, 2006 at 11:03:28AM +0200, Christoph Anton Mitterer wrote: > Francesco Pietra wrote: > > Mother bowrd Tyan K8WE S 2895, two 265 dual opteron, all eight slots of ram > > filled (1 GB each) > > > > At computer on: > > CPU0=Dual Core amd64 opteron 265 > > CPU1=Dual Core amd64 opteron 265 > > > Hi,.. this is off topic: > I have the same board with two 275 Opterons and these days where its > hot here in Munich (for what we are used to here) I have enormous heat > Problems. > > I'm using BIOS Version 1.03 of the board and it shows me about the > following temeratures: > CPU0 45° C > CPU1 73° C (I think this must be a BIOS error) > Ambient 50 °C > > And this when the systems does nothing (expect from running X and the > usual stuff). > > Also the chipsets get very hot... > > Could you please tell me your experiences with that board?
Try the lm_sensors.conf from Tyan: ftp://ftp.tyan.com/software/lms/lms_s2895.conf I experienced similar problems with an S2885, and most of it went away by using Tyan's lm_sensors config file. The config file still needed a little tweaking (high temp for the two CPUs were completely different) but at least it gives you a working config file to start with. Erik -- +-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 -- | Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]