On Sat, 09 Sep 2006 23:05:43 -0500 Karl Schmidt <[EMAIL PROTECTED]> wrote:
> I went from AMD64-K8-SMP sarge to etch and now it no longer sees this > SATA plextor DVD drive. > > #cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: HDT722525DLA380 Rev: V44O > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi4 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: HDT722525DLA380 Rev: V44O > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: Generic Model: USB SD Reader Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi2 Channel: 00 Id: 00 Lun: 01 > Vendor: Generic Model: USB CF Reader Rev: 1.01 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi2 Channel: 00 Id: 00 Lun: 02 > Vendor: Generic Model: USB SM Reader Rev: 1.02 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi2 Channel: 00 Id: 00 Lun: 03 > Vendor: Generic Model: USB MS Reader Rev: 1.03 > Type: Direct-Access ANSI SCSI revision: 02 > > -- this shows the two hard drives and the USB card reader - but the > drive is not listed? > I am going through something similar. My SCSI cd-r shows errors then disconnects. I have an older (PIII 1gz smp) box but I think the issue is with IRQ/acpi/apic allocation. My next test is 'noapic, pci=bios' the IRQ routing numbers otherwise don't make sense, to me anyway. My bios allows me to asign an IRQ per slot. -- Greg Madden -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]