Hi all.
The subject of this mail is the message I can find for every boot in my
/var/log/messages file.
I've set up a RAID1 environment with etch amd64; it's composed of 2
identical HDDs. The partitioning scheme is the same for both the devices.
I've put the swap area (a /dev/md1 made by /dev/sda5 and /dev/sdb5) in
the RAID, setting the ID label as "fd" (that is the 'Linux raid
autodetect' mode).
The /proc/mdstat file says about that partition:
md1 : active raid1 sda5[0] sdb5[1]
1951744 blocks [2/2] [UU]
Is that correct?
Is the swap area working right despite the message above?
If so, why do I get that strange message in the logs?
Thanks a lot for your hints.
Greetings,
Matteo
--
Matteo F. Vescovi
mfv (at) fsugpadova (dot) org
Free Software Users Group Padova
GPG Fingerprint: 8EF0 F019 80D1 96BF C9C6 387E D6DE 031F 991F 9D2D
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
