On Sun, Mar 25, 2001 at 02:33:56PM +0530, Harishankkar wrote: > we have downloaded the linux kernel to the assabet .We have > followed the instructions in the web site > [1]http://www.cs.cmu.edu/~wearable/software/assabet.html. > .We got the linux penguin image on the LCD since we have included the > frame > buffer support in the kernel. > After this we get the D8 LED constantly blinking.What does this > mean?Does > this mean that we have loaded linux properly. > Now then we tried the RAM disk image that is given in the site. > After downloading the kernel only the TUX image in the LCD screen > appears > minicom gets started up and no messages > on the serial port,what could be the problem?. We have configured > minicom > for 9600 8 bits 1 stop bit.Is it possible to > get a login prompt in the serial Port?We are using the angelboot > utility for > linux as the host program fro downloading. > When we tried to make a RAMDISK on our own we got a message in the > serial > port > Mount root file system(ext2)64 K freed > Kernel Panic:init not found > It did not say anything on RAM DISK initialised. > what could be the problem? > Is it possible to single step the code ?I am having only the assabet > only .
This is not debian-arm related. I suggest to take this question to the linux-arm or sa1100-linux list. See http://www.lart.tudelft.nl/doc.php3 for mailing list addresses. Erik -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED] WWW: http://www-ict.its.tudelft.nl/~erik/
