* Ross Burton <[EMAIL PROTECTED]> [2007-09-28 10:42]: > I see that 4.0r1 is broken, is it best to install r0 or are there > installer images with the fixed kernel on? I could try installing Sid, > but I'd prefer something known to work. :)
The problem is that r0 is no longer on the mirrors so you cannot install that. Anyway, there's a fairly easy workaround: install using the 4.0r1 images, and when base install fails, do base install again - this time it will ask you which kernel version to install. > I've never done software RAID before, so I'm being cautious. Is it > fairly simple with the Debian installer to setup a 4G /, 1G swap, and > the rest as /home, all on RAID-1? Would I need a separate /boot, or is > the initramfs in the flash sufficient? RAID setup in d-i is fairly easy, even if maybe not very obvious (you first need to mark some partitions for RAID, then go to a RAID config tool, then configure the md partitions). You won't need a special /boot. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]