Hi, I'm following the instructions from <http://www.cyrius.com/debian/nslu2/install.html>. It all goes pretty fine until the point I have to choose the installer modules, that is: partman-auto, partman-ext3 and usb-storage-modules-2.6.18-5-ixp4xx-di. Unfortunately, I have no usb-storage-modules-2.6.18-5-ixp4xx-di module in the list. Without this module, the installer cannot see my USB stick nor USB HDD, and the partman sees only the internal memory blocks.
Just in case, I checked /lib/modules/2.6.18-5-ixp4xx/kernel/drivers/usb/ and some other places and I could not find any usb-storage.ko like kernel module, so I'm stuck at this point. I use the unofficial binary file from http://www.slug-firmware.net/ with I flashed successfully onto the nslu2. (the debian-4.0r2.zip release) A few info from the terminal: ~ # uname -a Linux NSLU2 2.6.18-5-ixp4xx #1 Sat Jun 2 12:56:45 UTC 2007 armv5tel unknown ~ # lsmod Module Size Used by ixp4xx_mac 19316 0 evdev 10208 0 ixp4xx_qmgr 8396 5 ixp4xx_mac ixp4xx_npe 14080 2 ixp4xx_mac firmware_class 10400 1 ixp4xx_npe ehci_hcd 31016 0 ohci_hcd 16932 0 ixp4xx_beeper 3392 0 usbcore 126248 3 ehci_hcd,ohci_hcd ~ # tail -f /var/log/syslog ... Feb 18 00:33:53 kernel: usb 3-2: new high speed USB device using ehci_hcd and address 4 Feb 18 00:33:53 kernel: usb 3-2: configuration #1 chosen from 1 choice ~ # Any suggestion will be greatly appreciated. Thank you very much. -- Marcos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]