In my hurry to get Debian on to my Sheevaplug, I stupidly said "yes" to changing the envs config when attempting to upgrade U-boot to cope with SD cards (as per the bottom of the page at www.cyrius.com).
I've reflashed U-boot using the Sheevaplug alpha 6 installer - I have a working U-boot but it fails with ---cut here--- Marvell>> reset ▒ __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: SHEEVA PLUG LE U-Boot 1.1.4 (Apr 29 2009 - 13:10:05) Marvell version: 3.4.16 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CF100 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM CS[1] base 0x10000000 size 256MB DRAM Total size 512MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:512 MB *** Warning - bad CRC or NAND, using default environment CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 Using egiga0 device TFTP from server 10.4.50.5; our IP address is 10.4.50.165 Filename 'uImage'. Load address: 0x2000000 Loading: T T T T T T T T T T Retry count exceeded; starting again ## Booting image at 02000000 ... Bad Magic Number Unknown command '<NULL>' - try 'help' Marvell>> ---cut here--- "Help, I've broken it HELP HELP!" sagt Andy Zu hilfe, bitte, AndyC -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org