Hi folks,
after running a few hundred days continuously my N2100 is now
no longer pingable. After rebooting with Power off/on (frontpanel
switch was no longer working) no success with ping etc. Some
HDD action is noticeable, no red front panel lights etc.
I am afraid that e2fsk etc is needed. But how can I get into a
console? IP address is configured statically, no DHCP.
Redboot is still available, nut no output if I do not interrupt with
Ctrl-C.
fis list delivers:
Name FLASH addr Mem addr Length Entry point
RedBoot 0xF0000000 0xF0000000 0x00040000 0x00000000
RedBoot config 0xF0FC0000 0xF0FC0000 0x00001000 0x00000000
FIS directory 0xF0FE0000 0xF0FE0000 0x00020000 0x00000000
ramdisk 0xF0040000 0x00800000 0x00D00000 0x00800000
kernel 0xF0D40000 0x00200000 0x00160000 0x00200000
user 0xF0EA0000 0x00120000 0x00120000 0x00800000
So any hint to get my debian running again is very much appreciated.
Many thanks in advance,
Markus
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org