On 1 July 2010 20:45, Michael Trim <[email protected]> wrote: > Hello, > > I am attempting to install Debian testing on my new TS-219P. I have > followed the instructions at [1], and have successfully launched the > installer and set up the language, location, timezone etc., however > the installer is unable to detect the installed hard disks. The > installer hangs for some time at the "Detecting disks and all other > hardware" screen, then shows the following screen: > >> [!] Detect disks >> >> No disk drive was detected. If you know the name of the driver needed by >> your disk drive, you can select it >> from the list. >> >> Driver needed for your disk drive: >> >> continue with no disk drive >> loop >> scsi_dh >> scsi_mod >> sd_mod >> sr_mod >> none of the above > > I have tried each of the options above and none of them work. > > Both installed hard disks are Western Digital WD20EARS (2TB drives > with 4KB sectors), and were detected and configured correctly with the > QNAP firmware. > > Any ideas? Please CC me on any replies as I am not subscribed to the > list, thanks. > > -- Michael Trim > > [1] http://www.cyrius.com/debian/kirkwood/qnap/ts-219/install.html >
I also get the same behaviour with the stable/lenny installer. -- Michael Trim -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
