Hai Nguyen Dang <dangha...@gmail.com> writes: > Hi All,
Hi, > I tried to compile and upgraded my Sheevaplug from kernel 2.6.38 to 2.6.39 > with my own compiled kernel, however I always got the mount root problem as > below. > > This is a part of uBoot messages before kernel panic and hang, my SheevaPlug > boots from USB normally with kernel 2.6.38 (I tried to compile the kernel > 2.6.39 many times, the last time I used kirkwood_defconfig without changes > as my kernel configuration but it doesn't work). > > ======================================== > usb 1-1: new high speed USB device number 2 using orion-ehci > ata2: SATA link down (SStatus 0 SControl F300) > Root-NFS: no NFS server address > VFS: Unable to mount root fs via NFS, trying floppy. > VFS: Cannot open root device "(null)" or unknown-block(2,0) > Please append a correct "root=" boot option; here are the available > partitions: > 1f00 1024 mtdblock0 (driver?) > 1f01 4096 mtdblock1 (driver?) > 1f02 519168 mtdblock2 (driver?) > Kernel panic - not syncing: VFS: Unable to mount root fs on > unknown-block(2,0) Can you please provide your kernel command line ? Are you booting with an initrd ? If you're booting without initrd, from the part of the log, an usb devices seems to be detected but not yet probed. Maybe you're missing a rootwait in your kernel command line or missing usb mass storage support in your kernel ? Regards, Arnaud -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/8739jjma9h....@lebrac.rtp-net.org
