On Mon, Mar 26, 2012 at 02:03:23PM +0200, Hector Oron wrote: > Yes, Debian armhf kernel supports i.MX53 LOCO boards.
That's good to know. > Configure u-boot as described at (make sure partition is <1GB), I > usually use 100MB > < http://blog.einval.com/2011/09/05#armhf_buildds > > > Install debian kernel package for mx5. Make sure initramfs is > generated. Run later flash-kernel (>=3.0~rc.4) to generate > uImage/uInitrd. Oh I just did the mkimage steps manually. I am so used to uboot that I didn't even think of looking for a tool to do it. I better check that flash-kernel doesn't use some magic options that I missed. > Being mainline kernel, expect few things to work, at least SATA, > serial and MMC/SD support is there. I probably need a newer u-boot or something. I am poking at that now. If MMC/SD and SATA and serial work, then I should be OK for now. Graphics would be nice, but not essential and would of course need USB as well in that case. -- Len Sorensen -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120326141617.gq10...@caffeine.csclub.uwaterloo.ca
