Hi Andrew, Just a clue,
Le 09/02/2012 14:45, Andrew M.A. Cater a écrit : > Upated to lastest DENX U-boot and went to install Debian as per Martin's > excellent instructions. > > Aborted the install part way through. > > Now can't get back into the plug via U-boot : screen /dev/ttyUSB0 115200 > isn't working. > > Have one green light - serial plug, reset are facing you as the plug lies > with mains on right had side, Ethernet on left: this is the right hand one of > the two green LEDs opposite the SD card. > > There is Ethernet activity. > > Reset button has no apparent effect. > > Nmap doesn't show it at least at 192.168.1.0/24 > > Any ideas? > > This is the third or fourth attempt: I've another working Sheevaplug > installed last week, but without serial console to this one I can't get any > further. Use you usb/serial as a JTag (it works also as a jtag). You can reflash yoyr uboot usng openocd [1]. FYI, then only sheevaplugs bricked were because of power supply faulty... ;-) [1]https://doukki.net/doku.php?id=wiki:tutoriels:uboot.howto --- Gk2 :-] -- To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4f7fe347.3050...@doukki.net
