Hello
I get RAID like in topic. Here's link<http://thermaltakeusa.com/Product.aspx?S=1158&ID=1662#Tab0>to producers site. I want to change it's standard system to debian, freenas or other distribution which will allow me to use SSH, FTP, DLNA, NFS, CIFS but I'm total noob in that thing so I don't know from what to start. I've found some information on debian mailing lists<http://www.mail-archive.com/[email protected]/msg10559.html>that somebody tried to do it but I haven't found information if he succeeded. Current system snapshots: # uname -a Linux MNAS4100 2.6.10-iop1 #135 Tue Apr 4 18:11:39 CST 2006 armv5tel unknown # cat /proc/cpuinfo Processor : XScale-IOP8032x Family rev 0 (v5l) BogoMIPS : 399.76 cpu MHz : 399.769 Features : swp half thumb fastmult edsp CPU implementer : 0x69 CPU architecture: 5TE CPU variant : 0x0 CPU part : 0x2e2 CPU revision : 0 Cache type : undefined 5 Cache clean : undefined 5 Cache lockdown : undefined 5 Cache format : Harvard I size : 32768 I assoc : 32 I line length : 32 I sets : 32 D size : 32768 D assoc : 32 D line length : 32 D sets : 32 Hardware : Intel IQ31244 Revision : 0000 Serial : 0000000000000000 # cat /proc/interrupts CPU0 0: 0 IOP321 DMA 0 EOT 1: 0 IOP321 DMA 0 E0C 2: 0 IOP321 DMA 1 EOT 3: 0 IOP321 DMA 1 E0C 9: 46631 IOP321 Timer Tick 11: 33 IOP321 i2c biu adapter 0 12: 35 IOP321 i2c biu adapter 1 20: 0 IOP321 DMA 0 ERR 21: 0 IOP321 DMA 1 ERR 27: 1665 eth0 28: 22635 serial 29: 15755 GD31244 31: 0 pic16f8x Err: 0 # cat /proc/meminfo MemTotal: 255940 kB MemFree: 196440 kB Buffers: 3468 kB Cached: 20676 kB SwapCached: 0 kB Active: 22304 kB Inactive: 9824 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 255940 kB LowFree: 196440 kB SwapTotal: 263072 kB SwapFree: 263072 kB Dirty: 52 kB Writeback: 0 kB Mapped: 14516 kB Slab: 8152 kB CommitLimit: 391040 kB Committed_AS: 121732 kB PageTables: 592 kB VmallocTotal: 745472 kB VmallocUsed: 10656 kB VmallocChunk: 3907584 kB # cat /proc/pci PCI devices found: Bus 0, device 1, function 0: Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 5). IRQ 27. Master Capable. No bursts. Min Gnt=255. Non-prefetchable 32 bit memory at 0x80000000 [0x8001ffff]. Non-prefetchable 32 bit memory at 0x80020000 [0x8003ffff]. I/O at 0xfe000000 [0xfe00003f]. Bus 0, device 3, function 0: Class 0106: Intel Corp. GD31244 PCI-X SATA HBA (rev 0). IRQ 29. Master Capable. No bursts. Min Gnt=16.Max Lat=1. Non-prefetchable 64 bit memory at 0x80060000 [0x80060fff]. Currently only way to administrate it is through telnet or website. It has RS-232 but I don't have cable to connect it. Can somebody help me with it? Pozdrawiam / Regards *Marcin Sojka* **
