On Mon, 2015-08-24 at 17:39 -0700, Rick Thomas wrote: [...] > Watching the (USB) serial console output during booting, I notice the > following: > > > resetting ... > > > > U-Boot SPL 2014.10+dfsg1-5 (Apr 07 2015 - 22:16:43) > > > > > > U-Boot 2014.10+dfsg1-5 (Apr 07 2015 - 22:16:43) > > > > CPU: Freescale i.MX6Q rev1.5 at 792 MHz > > Reset cause: WDOG > > Board: MX6-CuBox-i > > DRAM: 2 GiB > > MMC: FSL_SDHC: 0 > > *** Warning - bad CRC, using default environment > > I understand the “bad CRC” as I’ve never done a “saveenv” so there is no > environment for it to read. But that begs the question: What is in the > default environment?
Interrupt boot by pressing a key on the serial console (assuming it gives you a countdown to do that in) then enter the command 'printenv' which will list the environment. -- Tixy