Does anyone know what the error messages Does anybody know what is causing the subject error messages?
It almost looks like the DTB is claiming a couple of devices that don't exist on this hardware... But I don't understand enough of that process to be sure. Anybody got some clues? I've attached the first several lines of the boot log, up-to and including the error messages, in hopes that they may have some information about the hardware. Thanks! Rick > U-Boot 2015.10+dfsg1-3 (Nov 24 2015 - 22:14:29 +0000) > > CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) > CPU: Extended Commercial temperature grade (-20C to 105C) at 29C > Reset cause: WDOG > Board: MX6 Cubox-i > DRAM: 2 GiB > MMC: FSL_SDHC: 0 > No panel detected: default to HDMI > Display: HDMI (1024x768) > In: serial > Out: serial > Err: serial > Net: FEC > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > Found U-Boot script /boot.scr > 1474 bytes read in 32 ms (44.9 KiB/s) > ## Executing script at 12000000 > 3415976 bytes read in 371 ms (8.8 MiB/s) > 33984 bytes read in 98 ms (337.9 KiB/s) > 17496691 bytes read in 1231 ms (13.6 MiB/s) > Booting Debian 4.3.0-1-armmp from mmc 0:1... > Kernel image @ 0x12000000 [ 0x000000 - 0x341fa8 ] > ## Flattened Device Tree blob at 18000000 > Booting using the fdt blob at 0x18000000 > Using Device Tree in place at 18000000, end 1800b4bf > > Starting kernel ... > > [ 0.098389] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 > > [ 1.485042] imx-sdma 20ec000.sdma: firmware: failed to load > imx/sdma/sdma-imx6q.bin (-2) > [ 1.544474] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 > [ 1.551844] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 > Loading, please wait... > [ 2.221380] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 > [ 2.257486] ERROR: could not get clock /usdhc1_pwrseq:ext_clock(0) >