Looks like device tree's dtb's, as I said seems that your missing alot as per the fist errors ( GPIO's ) and the size difference you saw.
more info here https://github.com/raspberrypi/linux/issues/2543 with the link pointing here https://github.com/raspberrypi/firmware/tree/master/boot Nige On Wed, Jan 1, 2020 at 6:15 AM basti <mailingl...@unix-solution.de> wrote: > > The kernel was build with > > make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- defconfig > make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- menuconfig > (to check if raspberry pi stuff is enablend) > make -j`nproc` ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg > > I get also firmware errors when I boot the original ubuntu image (log > attached). > so i think it doesn't matter. > > Boot the debian kernel I miss something like: > > [ 4.541716] mmc0: new ultra high speed DDR50 SDHC card at address aaaa > [ 4.555228] mmcblk0: mmc0:aaaa SC32G 29.7 GiB > [ 4.569103] mmcblk0: p1 p2 > > RASPBERRYPI_FIRMWARE is set in kernel config. I'm not sure what this > mean, what steps i have to do that the kernel use the firmware. > In the log attached you can find this: > > [ 0.096980] raspberrypi-firmware soc:firmware: Attached to firmware > from 2019-08-15 12:03, variant start > [ 0.100911] raspberrypi-firmware soc:firmware: Firmware hash is > 9f8431fb7839c7f00f52b81f5822ddab2b31d0db > > which file is used there? > > On 01.01.20 05:23, Nigel Sollars wrote: > > Just took a look at the bootlog there, those GPIO failures arnt > > clever, missing firmware I would take a wild guess that things in the > > latest kernel tree has changed I did also see an article about newer > > support for the Pi 4 in the latest kernel ( cant remember if its 5.4 > > or 5.5 ). Do you use 'make menuconfig'?. the size difference you > > mention with those errors do point to you not enabling the needful > > > > Looks like 4.19 has been the latest for along time, I would diff your > > 5.5 config with the 4.19 and see what you have missing / what has > > moved / changed. A quick google does not yield much so you could be > > very much on your own / pioneering this one. > > > > Hopefully helpful links > > > > Someone to perhaps reach out to for info, > > https://forum.manjaro.org/t/raspberry-pi-4-5-4-1-kernel/114273 > > > > 5.5 Graphics / better support by all accounts, > > > > https://www.phoronix.com/scan.php?page=article&item=linux-55-features&num=1 > > https://www.linux-arm.info/index.php/1537-linux-5-5-lands-broadcom-bcm2711-raspberry-pi-4-bits > > > > again hope this helps > > > > Nige > > > > On Tue, Dec 31, 2019 at 5:18 AM basti <mailingl...@unix-solution.de> wrote: > >> Hello, > >> > >> I have try to build kernel for raspi4 from upstream (5.5-rc3). Kernel > >> boot but can't find the SD Card, so there is no partition, no root-fs > >> and end up in initramfs/busybox. > >> > >> Log of serial console is attached. I have used U-boot and dtb from > >> ubuntu image. My dtb build during kernel build is a half size of the > >> ubuntu one and doesn't work. > >> > >> the custom build kernel works on rpi3 out of the box. > >> > >> best regards > >> > >> p.s. i build it as deb package > >> > >> > > > -- “Science is a differential equation. Religion is a boundary condition.” Alan Turing
