Lucas Nussbaum dijo [Sun, May 10, 2020 at 10:59:29AM +0200]: > Hi Gunnar, > > I tried booting the RPI2 image from > https://raspi.debian.net/daily/raspi_2.img.xz > > Boot fails. It never leaves the colorful screen on HDMI. > > Rebuilding the image myself worked. But even then, the serial console > does not work (only HDMI worked). The image uses console=ttyS1 in > cmdline.txt, while the serial port is named ttyAMA0 on this board.
Humh, I think it's due to the previous version of the firmware didn't set upstream_kernel=1. It has now been accepted in Buster proper, so it no longer needs the kludge I set when building for RPi0/1. I just checked on my 2, and it boots correctly. I also updated the web page. Thanks!