On maandag 10 mei 2021 13:12:12 CEST Punit Agrawal wrote: > Not sure if it's still helpful but ...
Yes it is, thanks :) > The board is already using device tree from upstream kernels so I didn't > have to mess with them to enable the devices. I checked the nodes with > fdtget and they showed status "okay" for both the nodes. Excellent. I made the request without doing ('proper') research into rk3399/RockPro64, but I just took a look based on your msg and it appears that the dts[i] files for rk3399/RockPro64 are far more 'evolved' (more detailed/enabled nodes). > Diederik de Haas <didi.deb...@cknow.org> writes: > > But those settings are actually in rk3328.dtsi. And there is a similar > > file rk3399.dtsi where it seems the same (simple) change is needed. Since my initial email I've become slightly less noob-ish, so for the other noobs trying to learn about DTs, here's a correction. (Hopefully correct ;)) You (normally) wouldn't change those general files, but 'override' them in board specific files like rk3328-rock64.dts where you reference the nodes defined in those general files. Programmers analogy: you don't change the class definition, but change the (board) implementation. > On my RockPro64 and see the following output - > rockpro64:~$ uname -a > Linux rockpro64 5.10.0-6-arm64 #1 SMP Debian 5.10.28-1 (2021-04-09) > aarch64 GNU/Linux > rockpro64:~$ aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: hdmisound [hdmi-sound], device 0: ff8a0000.i2s-i2s-hifi > i2s-hifi-0 [ff8a0000.i2s-i2s-hifi i2s-hifi-0] Subdevices: 1/1 > Subdevice #0: subdevice #0 > > rockpro64:~$ grep SND_AUDIO /boot/config-5.10.0-6-arm64 > # CONFIG_SND_AUDIO_GRAPH_CARD is not set > > It seems the config doesn't need enabling for sound on this > device at least. Awesome. Apparently some use audio-graph-card while others use simple-audio-card and in kernel 5.12 the Rock64 switches from one to the other: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=25572fb5aa986bdbb35d06c0fb52a9b9d9b3b2c9 "For newly adding nodes, ASoC guys recommend to use audio-graph-card. But all other sound nodes for rk3328 have already been defined by simple-audio-card. In this time, I chose for consistent sound nodes." I may be wrong here, but it appears that for the Rock64, 'audio-graph-card' is used for 'sound' while 'simple-audio-card' is used for 'hdmi-sound'. So, to get "better multimedia support in Debian kernels" it very much appears that having both 'simple-audio-card' and 'audio-graph-card' seems desirable. Cheers, Diederik
signature.asc
Description: This is a digitally signed message part.