Package: installation-reports Boot method: network Image version: http://cdimage.debian.org/cdimage/lenny_di_beta2/i386/iso-cd/debian-LennyBeta2-i386-netinst.iso Date: 2008-06-30
Machine: laptop Toshiba Tecra 8000 Processor: pentium2 Memory: 128M Partitions: <df -Tl will do; the raw partition table is preferred> Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda1 ext3 76549056 7881108 64779420 11% / tmpfs tmpfs 63516 0 63516 0% /lib/init/rw udev tmpfs 10240 52 10188 1% /dev tmpfs tmpfs 63516 12 63504 1% /dev/shm Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 03) 00:04.0 VGA compatible controller [0300]: Neomagic Corporation NM2200 [MagicGraph 256AV] [10c8:0005] (rev 12) 00:05.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) 00:05.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) 00:05.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) 00:05.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02) 00:09.0 Communication controller [0780]: Toshiba America Info Systems FIR Port [1179:0701] (rev 23) 00:0b.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 05) 00:0b.1 CardBus bridge [0607]: Toshiba America Info Systems ToPIC97 [1179:060f] (rev 05) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [E] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: RTL-8169 ethernet PCMCIA not recognized, I had to stop install. The laptop had etch already installed. CD-ROM is old and may have problems. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]