Package: installation-reports Boot method: CD netinst i386 Image version: http://cdimage.debian.org/cdimage/lenny_di_beta2/i386/iso-cd/debian-LennyBeta2-i386-netinst.iso Date: 2008-09-17
Machine: IBM Server x3550 Processor: Xeon QC 2GHz Memory: 6GB Partitions: not get it Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge: Intel Corporation 5000X Chipset Memory Controller Hub (rev 12) 00:02.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 (rev 12) 00:03.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 3 (rev 12) 00:04.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x8 Port 4-5 (rev 12) 00:05.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 5 (rev 12) 00:06.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 6 (rev 12) 00:07.0 PCI bridge: Intel Corporation 5000 Series Chipset PCI Express x4 Port 7 (rev 12) 00:08.0 System peripheral: Intel Corporation 5000 Series Chipset DMA Engine (rev 12) 00:10.0 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev 12) 00:10.1 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev 12) 00:10.2 Host bridge: Intel Corporation 5000 Series Chipset Error Reporting Registers (rev 12) 00:11.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev 12) 00:13.0 Host bridge: Intel Corporation 5000 Series Chipset Reserved Registers (rev 12) 00:15.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev 12) 00:16.0 Host bridge: Intel Corporation 5000 Series Chipset FBD Registers (rev 12) 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 09) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 09) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 09) 00:1d.2 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #3 (rev 09) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 09) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 09) 00:1f.1 IDE interface: Intel Corporation 631xESB/632xESB IDE Controller (rev 09) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 09) 01:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 02:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02) 03:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c2) 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 11) 05:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c2) 06:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 11) 07:00.0 Fibre Channel: QLogic Corp. QLA2432 Fibre Channel Adapter (rev 03) 10:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port (rev 01) 10:00.3 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge (rev 01) 11:00.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 (rev 01) 11:01.0 PCI bridge: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E2 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [E] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: Broadcom Ethernet adapter was not detected and even manual load of module didn't help. I have no problem with Etch