Your message dated Tue, 31 Mar 2009 06:37:09 +0200
with message-id <20090331043709.gc5...@mykerinos.kheops.frmug.org>
and subject line Re: Bug#521888: installation-reports: don't ask 3 times about 
usb-mass-storage + pccard during install
has caused the Debian Bug report #521888,
regarding installation-reports: don't ask 3 times about usb-mass-storage + 
pccard during install
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
521888: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=521888
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Severity: wishlist

Hello,

When performing the install, we are asked during 'Network Detect' stage if we 
want to install support for 'usb-mass-storage', then for 'PC-Card'. We may wish 
to answer no to these. However, we will be re-asked twice more during the 
installation steps (I don't remind the second one, the third one being for 
'Disk Detection' step).
Maybe the installer could remind our choice and not ask again ?


-- Package-specific info:

Boot method: netinst
Image version: 
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/multi-arch/iso-cd/debian-testing-amd64-i386-powerpc-netinst.iso
  [probably 28-Mar-2009]
Date: 29-Mar-2009

Machine: Compal IFL91  (this is a laptop)
Partitions: n/a


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [E]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [E]
Overall install:        [O]

Comments/Problems:

-- 

Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.

Once you have filled out this report, mail it to sub...@bugs.debian.org.

==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="6.0 (squeeze) - installer build 20090328-00:01"
X_INSTALLATION_MEDIUM=cdrom

==============================================
Installer hardware-summary:
==============================================
umame -a: Linux Luchta 2.6.26-1-amd64 #1 SMP Sat Jan 10 17:57:00 UTC 2009 
x86_64 unknown
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 
PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 
GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 
GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB UHCI Controller #4 [8086:2834] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: uhci_hcd
lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB UHCI Controller #5 [8086:2835] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: uhci_hcd
lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: ehci_hcd
lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) 
HD Audio Controller [8086:284b] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) 
PCI Express Port 1 [8086:283f] (rev 03)
lspci -knn:     Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) 
PCI Express Port 2 [8086:2841] (rev 03)
lspci -knn:     Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) 
PCI Express Port 3 [8086:2843] (rev 03)
lspci -knn:     Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) 
PCI Express Port 4 [8086:2845] (rev 03)
lspci -knn:     Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) 
PCI Express Port 5 [8086:2847] (rev 03)
lspci -knn:     Kernel driver in use: pcieport-driver
lspci -knn: 00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) 
PCI Express Port 6 [8086:2849] (rev 03)
lspci -knn:     Kernel driver in use: pcieport-driver
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB UHCI Controller #1 [8086:2830] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB UHCI Controller #2 [8086:2831] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB UHCI Controller #3 [8086:2832] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 
Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: ehci_hcd
lspci -knn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI 
Bridge [8086:2448] (rev f3)
lspci -knn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC 
Interface Controller [8086:2815] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM 
(ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: PIIX_IDE
lspci -knn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM 
(ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: ahci
lspci -knn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus 
Controller [8086:283e] (rev 03)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn: 04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink 
BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: tg3
lspci -knn: 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 
3945ABG [Golan] Network Connection [8086:4222] (rev 02)
lspci -knn:     Subsystem: Intel Corporation Device [8086:1001]
lspci -knn:     Kernel driver in use: iwl3945
lspci -knn: 0e:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 
Controller [1180:0832] (rev 05)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: ohci1394
lspci -knn: 0e:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
lspci -knn:     Kernel driver in use: sdhci
lspci -knn: 0e:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick 
Bus Host Adapter [1180:0592] (rev 12)
lspci -knn:     Subsystem: COMPAL Electronics Inc Device [14c0:0026]
/proc/cmdline: desktop=kde priority=low vga=normal 
initrd=/install.amd/initrd.gz --  BOOT_IMAGE=/install.amd/vmlinuz 

-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash



--- End Message ---
--- Begin Message ---
Quoting Christophe (christophe.cu...@free.fr):
> Package: installation-reports
> Severity: wishlist
> 
> Hello,
> 
> When performing the install, we are asked during 'Network Detect' stage if we 
> want to install support for 'usb-mass-storage', then for 'PC-Card'. We may 
> wish to answer no to these. However, we will be re-asked twice more during 
> the installation steps (I don't remind the second one, the third one being 
> for 'Disk Detection' step).
> Maybe the installer could remind our choice and not ask again ?


This is a design choice.

As you progress along th installer, mor ehardware support is installed
and, at some moment, you might want to use one of the removable media
to load...whatever could be needed.

Please note that these questions only appear during expert installs
and not default installs.

So, I don't think this is something we will "fix" as this is actually
more a feature than a bug.

Attachment: signature.asc
Description: Digital signature


--- End Message ---

Reply via email to