Package: installation-reports Severity: normal Tags: d-i Hello,
This is just to report about a successful d-i installation of the hurd-i386 port using Jeremy Koenig's current image :D -- Package-specific info: Boot method: CD Image version: http://jk.fr.eu.org/debian/hurd-installer/mini.iso built on 17th july 18:15 Date: 18th July Machine: KVM Partitions: Disk /dev/hd0: 1049 MB, 1049624576 bytes 255 heads, 63 sectors/track, 127 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000cd140 Device Boot Start End Blocks Id System /dev/hd0p1 * 1 114 911360 83 Linux /dev/hd0p2 114 128 110593 5 Extended /dev/hd0p5 114 128 110592 82 Linux swap / Solaris Filesystem Size Used Avail Use% Mounted on - 890M 269M 578M 32% / Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [O] Partition hard drives: [O] Install base system: [E] Clock/timezone setup: [ ] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: During debootstrap, at some point a find command starts a lot of translators, which fails a bit, I had to restart that step. At the very end (umount and reboot), pidof udevd was hanging. Reboot hadn't rebooted /etc/fstab is not generated. But apart from these, it went just fine within an hour. Samuel -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU installer" DISTRIB_RELEASE="6.0 (squeeze) - installer build 20100717-14:33" X_INSTALLATION_MEDIUM=monolithic ============================================== Installer hardware-summary: ============================================== uname -a: GNU debian 0.3 GNU-Mach 1.3.99/Hurd-0.3 i686-AT386 GNU/Linux lspci -knn: Usage: lspci [<switches>] lspci -knn: lspci -knn: Basic display modes: lspci -knn: -mm Produce machine-readable output (single -m for an obsolete format) lspci -knn: -t Show bus tree lspci -knn: lspci -knn: Display options: lspci -knn: -v Be verbose (-vv for very verbose) lspci -knn: -x Show hex-dump of the standard part of the config space lspci -knn: -xxx Show hex-dump of the whole config space (dangerous; root only) lspci -knn: -xxxx Show hex-dump of the 4096-byte extended config space (root only) lspci -knn: -b Bus-centric view (addresses and IRQ's as seen by the bus) lspci -knn: -D Always show domain numbers lspci -knn: lspci -knn: Resolving of device ID's to names: lspci -knn: -n Show numeric ID's lspci -knn: -nn Show both textual and numeric ID's (names & numbers) lspci -knn: -q Query the PCI ID database for unknown ID's via DNS lspci -knn: -qq As above, but re-query locally cached entries lspci -knn: -Q Query the PCI ID database for all ID's via DNS lspci -knn: lspci -knn: Selection of devices: lspci -knn: -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots lspci -knn: -d [<vendor>]:[<device>] Show only devices with specified ID's lspci -knn: lspci -knn: Other options: lspci -knn: -i <file> Use specified ID database instead of /usr/share/misc/pci.ids.gz lspci -knn: -M Enable `bus mapping' mode (dangerous; root only) lspci -knn: lspci -knn: PCI access options: lspci -knn: -A <method> Use the specified PCI access method (see `-A help' for a list) lspci -knn: -O <par>=<val> Set PCI access parameter (see `-O help' for a list) lspci -knn: -G Enable PCI access debugging lspci -knn: -H <mode> Use direct hardware access (<mode> = 1 or 2) lspci -knn: -F <file> Read PCI configuration dump from a given file usb-list: Error: directory /sys/bus does not exist; is sysfs mounted? df: Filesystem 1K-blocks Used Available Use% Mounted on df: df: /proc/mounts: No such file or directory free: /usr/bin/report-hw: line 59: free: not found /proc/meminfo: MemTotal: 393276 kB /proc/meminfo: MemFree: 94760 kB /proc/meminfo: Buffers: 0 kB /proc/meminfo: Cached: 0 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 84876 kB /proc/meminfo: Inactive: 195428 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 0 kB /proc/meminfo: LowFree: 0 kB /proc/meminfo: SwapTotal: 110588 kB /proc/meminfo: SwapFree: 110160 kB -- System Information: Debian Release: squeeze/sid Architecture: sh: cannot create /dev/null: Permission denied (i686-AT386) Kernel: GNU-Mach 1.3.99/Hurd-0.3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100718141303.822.77935.report...@debian