Greetings, I recently purchased a 4 CD set from CHGuy and have had nothing but problems with it. I spent several weeks reading up on Linux, decided to try the Debian dist. According to all the docs I read all my hardware was compatible. I have; DFI P2XBL Rev. B-1 w/ 440 BX chipset,Award bios ver. 4.51 PG 10/26/99; Celeron 300A @ 450MHz and 100 MHZ FSB; Maxtor 34098H4 40GB HDD; WD-AC26400B 6.4 GB HDD;Samsung CD-ROM; Acer 8x4x32 CD-RW; Creative Soundblaster PCI64 Ensoniq ES1370; Diamond Viper V330 Nvidia 4.10.01.6279 4-12-2001; Zoltrix Int Sp Phone FMVSP56i3; and the part in question : Promise Maxtor ATA100 PCI IDE Hdwr ver=-002 8-1-2000. The problem is I can get the udma66 kernel loaded and the base, but after reboot when the install program tries to scan the CDs for the packages I get alot of errors such as: ATAPI device hdc: Error: Illegal request=(SenseKey=0x50) Erro: Illegal mode for this track or incompatible medium--(asc=0x64, ascq=0x00) hdc; command error: status=0x51{DriveReadySeekComplete Error} hdc: command error:status=0x50 end request:I/O error dev 16:00 hdc, sector640 unable to read rock-ridge attributes ATAPI device hdc: Error: Illegal request--(sense key=0x50). And many more with different sector numbers. I wrote to CHGuy and he said it was due to the ATA 100 controller and to hook it to ide0 and install vanilla. Well.. I tried that but now can't even boot off the binary-1 CD, so I tried the idepci flavor but when I got to the scan part even more of the same errors. My CD-ROM scans the other 3 CDs with no problem and as I said all the docs I read indicated my hardware should be usable with Debian. Also I thought the 4 CD set would be able to boot all 4 flavors- I can only boot 2, vanilla and idepci. I would appreciate any input from anyone out there. I am not signed up for the mailing list, so if you could reply to my e-mail address. Thank you very much. Steve Altermatt [EMAIL PROTECTED]
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]