Your message dated Wed, 08 Sep 2010 03:58:36 +0000
with message-id <e1otbnw-0005xw...@ravel.debian.org>
and subject line Closing old installation report #248341
has caused the Debian Bug report #248341,
regarding Beta4 fails to boot on UltraSparc
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
248341: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=248341
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Debian-installer-version: 20040430 from
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/sparc/beta4/sarge-sparc-netinst.iso
uname -a: Linux val 2.4.19 #1 Fri Oct 4 18:36:11 EDT 2002 sparc64 unknown
<from a debian 3.0r1 installation>
Date: 20040509-1400
Method: Boot from cdrom using ISO-Image
Machine: Sun Ultra 1
Processor: UltraSparc
Memory: 128 MB
Root Device: SCSI, sda1
Root Size/partition table: fdisk -l output =
Disk /dev/sda (Sun disk label): 19 heads, 80 sectors, 2733 cylinders
Units = cylinders of 1520 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sda1 0 2388 1814880 83 Linux native
/dev/sda2 u 2388 2733 262200 82 Linux swap
/dev/sda3 0 2733 2077080 5 Whole disk
Disk /dev/sdb (Sun disk label): 16 heads, 135 sectors, 3880 cylinders
Units = cylinders of 2160 * 512 bytes
Device Flag Start End Blocks Id System
/dev/sdb1 0 3880 4190400 83 Linux native
/dev/sdb3 0 3880 4190400 5 Whole disk
Output of lspci: - (no PCI bus)
Base System Installation Checklist:
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
- loading of SILO fails with "Fast Data Access MMU miss"
Boot prompt output:
Sun Ultra 1 SBus (UltraSPARC 143MHz), Keyboard Present
OpenBoot 3.25, 128 MB memory installed, Serial xxx
Ethernet address xxx, Host ID: xxx
ok boot cdrom
Boot device /sbus/esp...@e,8400000/e...@e,8800000/s...@6,0:f File and args:
SILO Version 1.4.4
Fast Data Access MMU Miss
ok
- Cd checksum was verified
- woody installation on same machine was successful
- couldn't test boot from floppy (no floppy installed)
--
Michel Messerschmidt li...@michel-messerschmidt.de
antiVirusTestCenter, Computer Science, University of Hamburg
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---