Your message dated Mon, 20 Sep 2010 22:21:13 +0100 with message-id <4c97d049.7010...@debianpt.org> and subject line device name has caused the Debian Bug report #215473, regarding generated fstab does not take ide-scsi into account to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 215473: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=215473 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: installation-reports INSTALL REPORT Debian-installer-version : 1.10, Oct 8 2003 uname -a: Linux flit 2.4.22-1-386 #1 Fri Sep 5 20:56:48 EST 2003 i686 GNU/Linux Date installed: Oct 9 2003 Method: used http://gluck.debian.org/cdimage/testing/netinst/i386/sarge-i386-netinst.iso. Booted from CD Machine: IBM Thinkpad X22 Processor:Pentium III Memory:384MB Root Device: IDE, hda Root Size/partition table: [see attachment] Output of lspci: Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [E] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [E] Install base system: [O] Install boot loader: [E] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Configure network HW, config network - Installation system seems not to have either the eepro100 or the e100 module for the Intel PRO/100 fast ethernet card. Both these modules are in the base system. However, unlike woody bf2.4, it was not obvious how one can extract the drivers to a floppy for pre-loading. But since the base system is all on the CD, network configuration is not really needed. This won't be true for the business card version (which I did not try). Maybe an opportunity should be given in the base-config to configure networking if it hasn't yet been. I know base-config is not part of the installer, but maybe network config is not regarded as part of base-config. Another way is to instruct on how to extract the drivers from the packages in the iso. Mount Partitions - the mounting of the hard disk was fine, but the installer-generated fstab does not take into account that the CD device is accessed with the ide-scsi driver. The CD device must be manually remounted to allow further installation from CD. Install Grub - maybe this should be filed against the Grub installer. I think I saw this mentioned somewhere on the mailing lists, although not in any of the bug reports. The installer guesses the grub root wrong. So even though the grub boot loader, the kernel and initrd are all properly installed, the base system could not be booted. I was lucky to have a previously installed kernel with the proper grub root specification.Disk /dev/hda: 20.0 GB, 20003880960 bytes 240 heads, 63 sectors/track, 2584 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 557 4210888+ b W95 FAT32 /dev/hda2 2422 2583 1224720 1c Hidden W95 FAT32 (LBA) /dev/hda3 558 566 68040 83 Linux /dev/hda4 567 2421 14023800 f W95 Ext'd (LBA) /dev/hda5 567 1341 5858968+ 83 Linux /dev/hda6 1342 1443 771088+ 82 Linux swap /dev/hda7 1444 2421 7393648+ 83 Linux Partition table entries are not in disk ordersignature.asc
Description: This is a digitally signed message part
--- End Message ---
--- Begin Message ---hi all, with actual linux kernel both ide and sata devices, by default, use libata which names both with sdx style names. -- Melhores cumprimentos/Best regards, Miguel Figueiredo http://www.DebianPT.org
--- End Message ---