Package: installation-reports

Boot method: daily businesscard CD
Image version: Labeled as : Debian GNU/Linux testing "Squeeze" - Official 
Snapshot amd64 BC

Binary-1 20100927-03:45
Installation Date: 9/29 Afternoon JST

Machine: Intel D510MO based DIY PC
Processor: Atom D510
Memory: 4GB
Partitions:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003f791

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048      206847      102400   83  Linux
/dev/sda2          206848   268437503   134115328   83  Linux
/dev/sda3       268437504   335546367    33554432   83  Linux
/dev/sda4       335548414   625139711   144795649    5  Extended
/dev/sda5       335548416   369102847    16777216   82  Linux swap / Solaris
/dev/sda6       369104896   436213759    33554432   83  Linux
/dev/sda7       436215808   625139711    94461952   83  Linux

Output of lspci -knn:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] 
(rev 02)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family 
Integrated Graphics Controller [8086:a001] (rev 02)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition 
Audio Controller [8086:27d8] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:d618]
        Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 
1 [8086:27d0] (rev 01)
        Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 
2 [8086:27d2] (rev 01)
        Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 
3 [8086:27d4] (rev 01)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 
4 [8086:27d6] (rev 01)
        Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #1 [8086:27c8] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #2 [8086:27c9] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #3 [8086:27ca] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI 
Controller #4 [8086:27cb] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI 
Controller [8086:27cc] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller 
[8086:27bc] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI 
Controller [8086:27c1] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller 
[8086:27da] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:4f4d]
        Kernel driver in use: i801_smbus
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
        Subsystem: Intel Corporation DeskTop Board D510MO [8086:d615]
        Kernel driver in use: r8169
05:00.0 Multimedia controller [0480]: Xilinx Corporation Device [10ee:222a] 
(rev 01)
        Subsystem: Device [ef11:ddd5]


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [?]
Overall install:        [O]

Comments/Problems:
I have installed 64-bit squeeze to partition 3 ,one under normal BIOS, and 
another under UEFI BIOS.  First 2 partitions are reserved for 64-bit Windows 7, 
although I'm against co-existence in the same drive.

Since I have transition period of 4KB sector in mind, I have originally 
partitioned the drive using 2048 (512 bytes/sector) sector boundary (I should 
rather say 512 bytes lba, but the convention is sector...)
            Start                       End
        1   2048        (=0800h)        206847
        2   206848      (=32800h)       268437503
        3   268437504   (=10000800h)    335546367       debian64
        4   335546368   (=14000800h)    3907026943      extended
        5   335548416   (=1400100h)     369102847       swap
But as you can notice, the extended partition start is modified from the 
original 335546368 to 335548414 whichi is apparently not 2048 boundary at all.  
This modification happened immediately after the installation step of "Write 
changes to disk?" affirmative answer.(I can see it at Alt/F2 console).

Also another problem is grub2.  If I did not create 1st & 2nd partition, grub2 
is not installed to the beginning of 3rd partition even I requested non MBR 
install, and install to /dev/sda3 reagardless of normal or UEFI BIOS.  I cannot 
tel where it is installed instead.  I'm aware of warning of blocklist install.  
But it is a philosophical issue, I believe.

Thank you in advance to all the people working for debian installer.  You guys 
have done a good job.  We really appreciate your effort.


      



-- 
To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/959460.34190...@web114718.mail.gq1.yahoo.com

Reply via email to