Your message dated Fri, 28 Jan 2011 22:06:27 +0000
with message-id <201101282206.27587.el...@debianpt.org>
and subject line 
has caused the Debian Bug report #509400,
regarding installation-reports: optical drive not detected (Lite-On 20X 
LightScribe)
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
509400: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509400
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: CD
Image version: 
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
               
Date: Dec 20th--21st

Machine: customized P4500A from Polywell COmputers Inc. 
Processor: Intel Core 2 Duo E8500 3.16GHz
Memory:  2x DDR2 800MHz 2GB PC6400 Unbuffered Memory
Partitions: not yet partitioned

Output of lspci -knn (or lspci -nn): 
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller 
[8086:2e20] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root 
Port [8086:2e21] (rev 03)
        Kernel driver in use: pcieport-driver
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #4 [8086:3a37]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #5 [8086:3a38]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #6 [8086:3a39]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #2 [8086:3a3c]
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio 
Controller [8086:3a3e]
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Port 1 [8086:3a40]
        Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Port 5 [8086:3a48]
        Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express 
Port 6 [8086:3a4a]
        Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #1 [8086:3a34]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #2 [8086:3a35]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB 
UHCI Controller #3 [8086:3a36]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 
EHCI Controller #1 [8086:3a3a]
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface 
Controller [8086:3a16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port 
SATA IDE Controller [8086:3a20]
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 
[8086:3a30]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port 
SATA IDE Controller [8086:3a26]
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation Quadro FX 1700 
[10de:040f] (rev a1)
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit 
Ethernet Adapter [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II 
Controller [11ab:6121] (rev b2)
        Kernel driver in use: ahci
        Kernel modules: ahci, pata_marvell
05:00.0 Multimedia audio controller [0401]: VIA Technologies Inc. ICE1712 
[Envy24] PCI Multi-Channel I/O Controller [1412:1712] (rev 02)
05:01.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24/30 
[CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70)
        Kernel driver in use: ohci1394
        Kernel modules: ohci1394

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [E]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:

The optical dtrive is:

DVDRW/CD/DVD:Lite-On 20X LightScribe DVD+/-RW Dual-Layer IDE

which is identified in the BIOS as: IDE:ATAPI DVD A DH20A4P

I've tried the install with the i386 daily build of December 18th and also with 
the amd64 
Lenny beta 2 image of August 29th 2008. The latter was used for a problem-free 
installation 
in September. In each case, the system boots with no problem from the 
installation CD and we
get as far as the initial few screens of the installation process. It fails, 
though, to detect 
the optical drive. 

The system has no OS installed but was tested with a SUSE live CD before 
delivery. I haven't 
found any other reports of problems with this drive under linux. Further, I was 
able to boot from an
Ubuntu 8.04 live CD; that went fine---the CD-ROM was detected and the 
file-system on it was mounted.  
So I don't believe that there is a problem with the hardware.

I was able to switch to a console, mount a thumb-drive, and copy /var/syslog to 
that. The crucial part, I 
assume, is this:

Dec 21 14:44:21 main-menu[1539]: INFO: Menu item 'cdrom-detect' selected
Dec 21 14:44:21 net/hw-detect.hotplug: Detected hotpluggable network interface 
lo
Dec 21 14:44:21 net/hw-detect.hotplug: Detected hotpluggable network interface 
lo
Dec 21 14:44:21 hw-detect: ISA bus detected; loading module 'ide-generic'
Dec 21 14:44:21 kernel: [   10.141436] Uniform Multi-Platform E-IDE driver
Dec 21 14:44:21 kernel: [   10.141439] ide: Assuming 33MHz system bus speed for 
PIO modes; override with idebus=xx
Dec 21 14:44:21 kernel: [   10.141802] ide_generic: please use 
"probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Dec 21 14:44:21 kernel: [   10.141807] Probing IDE interface ide0...
Dec 21 14:44:21 hw-detect: insmod 
/lib/modules/2.6.26-1-486/kernel/drivers/ide/ide-core.ko 
Dec 21 14:44:21 hw-detect: insmod 
/lib/modules/2.6.26-1-486/kernel/drivers/ide/ide-generic.ko 
Dec 21 14:44:22 kernel: [   10.704024] Probing IDE interface ide1...
Dec 21 14:44:22 kernel: [   11.264029] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 21 14:44:22 kernel: [   11.264040] ide1 at 0x170-0x177,0x376 on irq 15
Dec 21 14:44:23 net/hw-detect.hotplug: Detected hotpluggable network interface 
lo
Dec 21 14:44:23 hw-detect: insmod 
/lib/modules/2.6.26-1-486/kernel/drivers/ieee1394/sbp2.ko 
Dec 21 14:44:23 hw-detect: Loading PCMCIA bridge driver module: i82365
Dec 21 14:44:23 kernel: [   11.546965] Intel ISA PCIC probe: not found.
Dec 21 14:44:23 hw-detect: FATAL: Error inserting i82365 
(/lib/modules/2.6.26-1-486/kernel/drivers/pcmcia/i82365.ko): No such device
Dec 21 14:44:23 apt-install: Queueing package udev for later installation
Dec 21 14:44:23 apt-install: Queueing package usbutils for later installation
Dec 21 14:44:23 apt-install: Queueing package acpi for later installation
Dec 21 14:44:23 apt-install: Queueing package acpid for later installation
Dec 21 14:44:23 apt-install: Queueing package acpi-support-base for later 
installation
Dec 21 14:44:23 apt-install: Queueing package libc6-i686 for later installation
Dec 21 14:44:23 hw-detect: Missing modules 'eth1394 (FireWire ethernet)
Dec 21 14:44:24 check-missing-firmware: no missing firmware in 
/tmp/missing-firmware
Dec 21 14:44:24 net/hw-detect.hotplug: Detected hotpluggable network interface 
lo
Dec 21 14:44:24 cdrom-detect: Searching for Debian installation media...
Dec 21 14:44:30 init: init: starting pid 1519, tty '/dev/tty2': '-/bin/sh'
Dec 21 14:45:52 cdrom-detect: CDROM-detect failed; unmounting CD just to be sure
Dec 21 14:45:52 main-menu[1539]: WARNING **: Configuring 'cdrom-detect' failed 
with error code 1
Dec 21 14:45:52 main-menu[1539]: WARNING **: Menu item 'cdrom-detect' failed.

I tried loading the ide_generic module with the parameter suggested 
("probe_mask=0x3f") but that
made no difference.

Thanks for any help. I really want Debian on this machine.




--- End Message ---
--- Begin Message ---
Closing the report as this was already fixed with the newer kernel.

-- 
Melhores cumprimentos/Best regards,

Miguel Figueiredo
http://www.DebianPT.org


--- End Message ---

Reply via email to