On Thu, Apr 07, 2011 at 06:58:21PM -0400, Joey Hess wrote: > Graham Keeling wrote: > > Hello, > > I'm not sure if this is the right place to talk about this, but here goes: > > > > I downloaded the uImage and uInitrd from this location: > > > > ftp://ftp.debian.org/debian/dists/wheezy/main/installer-armel/current/images/kirkwood/netboot/marvell/sheevaplug/ > > > > But it actually ends up installing squeeze, not wheezy. > > > > > > How should I go about getting this fixed? > > The installer images on ftp.debian.org are only updated for Debian > stable releases; that is the same as the squeeze installer currently. > > Use a daily build from http://www.debian.org/devel/debian-installer/
Thanks for this. However, I now have some possibly dumb questions. On the Sheevaplug, I am used to downloading a uImage and a uInitrd (these are the only files available in the FTP directory above), putting them on a USB stick, booting the plug and running commands like this on the u-Boot command line: usb start ext2load usb 0:1 0x00800000 /uImage ext2load usb 0:1 0x01100000 /uInitrd setenv bootargs console=ttyS0,115200n8 base-installer/initramfs-tools/driver-policy=most bootm 0x00800000 0x01100000 The only installers that I can find in the daily build directories are iso images. I do not know how to use these on the plug. Is there a way of converting an iso image to a uImage/uInitrd? -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110408090841.gr22...@invader.dev.equiinet.com