Package: installation-reports Boot method: CD Image version: Self-made Boot-CD with daily build of Wheezy installer Date: 2011-06-16
Machine: Self-made Desktop PC Processor: VIA C3 Nehemia Memory: 256MB Partitions: > Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf > /dev/sda5 btrfs 9764864 2634736 6352688 30% / > tmpfs tmpfs 5120 0 5120 0% /lib/init/rw > tmpfs tmpfs 23876 224 23652 1% /run > tmpfs tmpfs 5120 0 5120 0% /run/lock > tmpfs tmpfs 47748 8 47740 1% /tmp > udev tmpfs 114328 0 114328 0% /dev > tmpfs tmpfs 47748 0 47748 0% /run/shm > /dev/sda1 ext4 960504 33508 878204 4% /boot > /dev/sda7 btrfs 105804800 36544 103643728 1% /home Output of lspci -knn: > 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo CLE266] > [1106:3123] > Subsystem: VIA Technologies, Inc. Device [1106:aa01] > Kernel driver in use: agpgart-via > 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] > [1106:b091] > 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 80) > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller > [1106:3038] > Kernel driver in use: uhci_hcd > 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 80) > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller > [1106:3038] > Kernel driver in use: uhci_hcd > 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 80) > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller > [1106:3038] > Kernel driver in use: uhci_hcd > 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] > (rev 82) > Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] > Kernel driver in use: ehci_hcd > 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8235 ISA Bridge > [1106:3177] > Subsystem: VIA Technologies, Inc. Device [1106:aa01] > 00:11.1 IDE interface [0101]: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) > Subsystem: VIA Technologies, Inc. Device [1106:aa01] > Kernel driver in use: pata_via > 00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. > VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 50) > Subsystem: VIA Technologies, Inc. Device [1106:aa01] > Kernel driver in use: VIA 82xx Audio > 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] > [1106:3065] (rev 74) > Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet > Controller on VT8235 [1106:0102] > Kernel driver in use: via-rhine > 00:14.0 Ethernet controller [0200]: D-Link System Inc DWL-510 / DWL-610 > 802.11b [Realtek RTL8180L] [1186:3300] (rev 20) > Subsystem: D-Link System Inc DWL-510 Wireless PCI Adapter [1186:3301] > Kernel driver in use: rtl8180 > 01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. VT8623 > [Apollo CLE266] integrated CastleRock graphics [1106:3122] (rev 03) > Subsystem: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated > CastleRock graphics [1106:3122] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: I'm using a completely automatic installation via preseed-files. At partitioning, i detected a small issue with the mount options. Attached, there is my recipe file for partitioning (desktop_scheme.recipe). The mount options for / and /home are not overtaken in etc/fstab (attached). I looked in the manual for the recipe file. At the chapter for mount options, there is the following: > It is also possible to specify mount options. For example, to specify > "nodev,ro" for a partition, add the following lines for that partition: > options/nodev{ nodev } > options/ro{ ro } In my recipe file, there is: > options/compress=zlib{ compress=zlib } This mount option is not overtaken. Please have a look, if this is a misbehaviour. Thank you. Best regards Bernhard
partman-auto/text/desktop_scheme :: 1000 1000 1000 ext4 method{ format } format{ } use_filesystem{ } filesystem{ ext4 } mountpoint{ /boot } . 10000 10000 10000 btrfs method{ format } format{ } use_filesystem{ } filesystem{ btrfs } mountpoint{ / } options/compress=zlib{ compress=zlib } . 300% 300% 300% linux-swap method{ swap } format{ } . 10000 30000 1000000 btrfs method{ format } format{ } use_filesystem{ } filesystem{ btrfs } mountpoint{ /home } options/compress=zlib{ compress=zlib } .
# /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sda5 during installation UUID=bec569ce-a7d1-4444-a6f3-100618403ba1 / btrfs defaults 0 1 # /boot was on /dev/sda1 during installation UUID=9ddba42f-8df8-46e3-88dc-f10f9df43a30 /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=5857a6ce-33e5-4822-9f96-4fa80cc17fb4 /home btrfs defaults 0 2 # swap was on /dev/sda6 during installation UUID=96da5bf3-07aa-4c4d-bde5-e19ec8990308 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0