Package: installation-reports Package: installation-reports
Boot method: cd1 was booted from usb (dd .iso to a memory stick and verify md5sum Image version: Wheezy release cd1: http://cdimage.debian.org/debian-cd/7.0.0/amd64/iso-cd/debian-7.0.0-amd64-CD-1.iso Date: 5 May 0500 2013 Machine: Sony vaio nw11s Processor: T6500 (intel core 2 duo 2x 2.1Ghz) Memory: 4gb DDR2 @ 800Mhz Graphics card: AMD 4570 Partitions: Filesystem Type 1K-blocks Used Available Use% Mounted on rootfs rootfs 113322664 26480632 81085516 25% / udev devtmpfs 10240 0 10240 0% /dev tmpfs tmpfs 403004 868 402136 1% /run /dev/mapper/volumegrp01-volume02 ext4 113322664 26480632 81085516 25% / tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 806000 1052 804948 1% /run/shm /dev/sda3 ext4 208248 27080 170416 14% /boot Output of lspci -knn (or lspci -nn): Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O ] Detect network card: [O ] Configure network: [ O] Detect CD: [ O] Load installer modules: [O ] Detect hard drives: [O ] Partition hard drives: [ O] Install base system: [ E] Clock/timezone setup: [O ] User/password setup: [ O] Install tasks: [O ] Install boot loader: [O ] Overall install: [ O] Comments/Problems: The system detected drives correctly. However after the install I was unable to mount any external drives (ntfs), ("Error: rebuild ntfs-3g with FUSE support and setup setuid root"). The memory stick i used to install the system was written to fstab (see "fstab.output") (something that has not happened when squeeze was installed on the same system). Commenting out the external drive (which was used for the install) fixes this problem. find attached "lspci" as ouput of lspci -knn Steps followed to install: 1- create 120GB unallocated space on drive 2- partition as /boot and lvm Debian 7 was installed with a \boot partition and an encrypted LVM partition for / and /home(boot as primary, the remainder as logical). 3- install grub to /boot
fstab.output
Description: Binary data
lspci.output
Description: Binary data