Ben Hutchings writes: > On Mon, 2013-08-05 at 16:31 -0700, Matt Taggart wrote: > > I think I am seeing the same bug reported in #716978... > >=20 > > I just did an install of wheezy using a d-i daily (updated today > > 2013-08-05). The root is md raid->crypt->lvm. Upon boot the initramfs > > started up the md raid devices properly, but failed to setup the crypto > > and dropped to an initramfs shell. When I poke around I see that > >=20 > > /lib/modules/3.2.0-4-amd64/kernel/crypto/ > >=20 > > is lacking most of the crypto modules (including the xts/serpant/etc > > that my system needed). So I am unable to bring things up by hand > > either. > >=20 > > During the install, for the question about how much to include in the > > initramfs, I picked the "just what's needed by this system" answer, > > although I think that should have been OK. > > I doubt we'll ever be able to get it completely right. That option > should be warned against in general. It is useful for machines with > limited memory or space for the initramfs (e.g. ARM systems where the > bootloader looks for it in a specific flash partition). Otherwise it > just saves a fraction of a second of boot time, or fails to boot.
I used d-i rescue mode to mount the disks and switch from "dep" to "most" mode for update-initramfs and that pulled the crypto modules in. But now the problem is that the LVM tools aren't in the initramfs so it gets stuck at that point. -- Matt Taggart tagg...@debian.org -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130806171758.2a97e...@taggart.lackof.org