Your message dated Sat, 31 Aug 2013 12:52:55 +0200
with message-id <201308311253.30231.hol...@layer-acht.org>
and subject line dealing with old installation-reports
has caused the Debian Bug report #693891,
regarding Fails to boot in UEFI mode on Dell PowerEdge R520
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
693891: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=693891
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: netinst amd64 cd-rom
Image version: Debian GNU/Linux testing "Wheezy" - Official
Snapshot amd64 NETINST Binary-1 20121121-09:10
Date: 2012-11-21 15:00 GMT+1
Machine: Dell PowerEdge R520
Processor: 2x Intel Xeon E5-2430L
Memory: 32 GB
Partitions: empty disk
Output of lspci -knn (or lspci -nn):
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
With both beta 4 amd64 netinst image from
http://cdimage.debian.org/cdimage/.wheezy_di_b4/as as the daily amd64
netinst build 20121121-09:10, this system refuses to boot in UEFI mode.
I did the following actions when powering on the machine:
- insert cd-rom
- Press F11: UEFI boot menu.
- In the graphical Boot Manager Main Menu, I select UEFI boot menu
- Then I select Embedded SATA Port Optical Drive
- This text appears on the screen:
Boot Failed:
Please ensure compatible bootable media is available.
Use the system setup program to change the boot mode as needed.
Strike F1 to retry boot, F2 for system setup, F11 for boot manager.
If I replace the Debian disc by SystemrescueCD 3.00 disc and strike F1,
the system successfully loads up the GRUB boot loader on the
SystemRescueCD 3.00 disc in UEFI mode.
When I start the same Debian disc in BIOS mode, it loads successfully.
--
Frederik Himpe <fhi...@telenet.be>
--- End Message ---
--- Begin Message ---
Hi,
thank you for submitting installation reports, much appreciated.
I read through all the bugs mentioned here (and I'm sure they were read by
several people at the time they were submitted) and am closing them now as/if
- they (finally) indicated success and/or
- I know from first hand experience that the functionality is working in
Wheezy and/or
- they only contained very little information and/or
- they contained user errors and/or
- they were caused by broken hardware and/or
- they have been from a development phase where things were not stable and/or
- they are quite old (and thus likely fixed today) and/or
- moreinfo was asked and not given or
- they are wishlist but rather special + exotic and not have been acted on for
years. (See http://blog.liw.fi/posts/wishlist-bugs/ why it's often useful to
close wishlist bugs.)
If I've closed a bug incorrectly please do reply (it's easy to reopen and I'll
do if requested) or just file a new one - thats often better, as the bug log
will be clearer and shorter and not contain cruft.
cheers,
Holger
signature.asc
Description: This is a digitally signed message part.
--- End Message ---