That shouldn't have killed speech post-install for you. Only thing I
can suggest is to do what you did before but this time in main menu save
log files and save them to a mounted file system. One will be offered
on the target disk. If you can get copies of everything in that
directory and send it in email to debian-boot, they may either find
errors that need fixing or assist you to get things going the correct
way.
On Fri, 20 May 2016, Nick Gawronski wrote:
Date: Fri, 20 May 2016 15:00:43
From: Nick Gawronski <n...@nickgawronski.com>
To: Jude DaShiell <jdash...@panix.com>,
Alex ARNAUD <alexarn...@member.fsf.org>,
debian-accessibil...@lists.debian.org
Cc: debian-boot@lists.debian.org
Subject: Re: debian-installer issues with no wireless network connection after
a text based Jessie installation
Hi, I used the S option to get speech during the installation then enabled
the network console using the loading menu options and then entered in my
password so had speech the entire installation and was mainly testing out the
network console. Are you saying even if I do that and have speech if I
install using the network console speech will not be turned on after the
installation even if it is used to start the network console? Nick Gawronski
On 5/20/2016 5:41 AM, Jude DaShiell wrote:
Windows 10 was probably why you didn't get speech post-install. Starting
debian with the s boot parameter turns on speech that debian produces for
the installation then by default keeps speech turned on post-install. Use
of a console with windows 10 enabled you to get the text over the console
so I suspect you failed to enable debian speech during installation. I
hope this solves one of your problems.
On Fri, 20 May 2016, Nick Gawronski wrote:
Date: Fri, 20 May 2016 02:54:02
From: Nick Gawronski <n...@nickgawronski.com>
To: Alex ARNAUD <alexarn...@member.fsf.org>,
debian-accessibil...@lists.debian.org
Cc: debian-boot@lists.debian.org
Subject: Re: debian-installer issues with no wireless network connection
after
a text based Jessie installation
Resent-Date: Fri, 20 May 2016 06:54:31 +0000 (UTC)
Resent-From: debian-accessibil...@lists.debian.org
Hi, The name of the iso I was using is firmware-8.0.0-amd64-netinst.iso
and it is in the archive for the debian-installer. I ran the installation
using this image as my network cards both wired and wireless require
firmware and I also ran the installation on low priority and choose to
install everything like non-free as well as backports. For the main tasks
for this text based installation I selected just the standard system as I
want this system to be small. Everything installed just fine and I was
connected to the installation over the network as I wanted to test out the
network console using my windows 10 system and was able to follow all
prompts but then once the Debian system rebooted no internet settings were
on the system in the /etc/network/interfaces or any other wifi packages
that were installed such as wpa_supplicant. My question is why does the
installer not copy over the wireless networking settings from the
installer to the target system when doing a text only install with speech?
Nick Gawronski
On 5/20/2016 1:07 AM, Alex ARNAUD wrote:
Dear Nick
On 05/20/2016 06:52 AM, Nick Gawronski wrote:
Hi, I am using the net installer of Jessie version 8.0.0 that includes
the firmware
Could you give us the full name of the Jessie ISO?
as I am totally blind and found that the latest installer once it was
installed I had no software speech after installing the system.
It depends on how you install your system. If you install you system in
braille or in "normal" way it's the normal effect.
I was installing Debian Jessie on my laptop with just a text based
system mainly for a rescue system for when X windows is down and for
times when I don't wish to use X windows. I found that during the
installation I was able to connect to the internet and successfully
install the system but once the system was rebooted I had no internet
access over any network method.
As I know, It seems there is no link with accessibility in this case.
What would it take for the debian installation to copy the network
settings from the installer to the target system as it makes no sence
why networking would be setup and working during a text based
installation but not in the target system? What file should I edit to
add my wireless network as well as my wired network using DHCP so they
both will work when my text based system boots? Nick Gawronski
The tips I use is to install a new driver for your Debian system.
For doing something like that you need to follow some steps :
1) Find the model of your card and the related firmware package in
Debian, if it's a Intel Wireless card it's the package firmware-iwlwifi
<https://packages.debian.org/fr/jessie/firmware-iwlwifi>
2) Add the backports repo in your environment as explained in this page :
http://backports.debian.org/Instructions/
3) Install the new package with a command like that : "apt-get install -t
jessie-backports FIRMWARE_NAME"
--
Alex ARNAUD
--
