Hi Martin, I attempted a network installation on an MV1220 currently running Jessie following your instructions regarding setting the load address of 0x600000 and the netboot.img from the following location from the daily builds:
https://d-i.debian.org/daily-images/armel/daily/orion5x/network-console/hp/mv2120/ The good news is that given the load address change from 0x400000 to 0x600000 allowed the MV2120 to boot into the ssh based installer. The bad news is the installed failed from what looked like some sort of segmentation faults in the installer from the looks of the logs which I included below. Below is the error I received: lqqqqqqqqqqqqqqqqu [!!] Debian installer main menu tqqqqqqqqqqqqqqqqk x x x Installation step failed x x An installation step failed. You can try to run the failing item x x again from the menu, or skip it and choose something else. The x x failing step is: Choose mirror to install from (menu item) x x x x <Continue> x x x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Using the expert installation fails in just the same manner. Attached below are the debug hardware summary and syslog which I hope are useful: Hardware Summary ----------------------------------------------------------------------------- uname -a: Linux backup 4.6.0-1-marvell #1 Debian 4.6.4-1 (2016-07-18) armv5tel GNU/Linux lsmod: Module Size Used by lsmod: ext4 495393 0 lsmod: crc16 1229 1 ext4 lsmod: jbd2 82552 1 ext4 lsmod: crc32c_generic 1561 0 lsmod: mbcache 3990 1 ext4 lsmod: sd_mod 30069 0 lsmod: sata_mv 25273 0 lsmod: libata 162527 1 sata_mv lsmod: scsi_mod 176204 2 libata,sd_mod lsmod: mvmdio 3004 1 lsmod: mv643xx_eth 26419 0 lsmod: of_mdio 5511 2 mvmdio,mv643xx_eth lsmod: libphy 27187 3 mvmdio,of_mdio,mv643xx_eth df: Filesystem 1K-blocks Used Available Use% Mounted on df: none 12404 20 12384 0% /run df: devtmpfs 57312 0 57312 0% /dev free: total used free shared buffers free: Mem: 124020 38188 85832 21720 0 free: -/+ buffers: 38188 85832 free: Swap: 0 0 0 /proc/cmdline: console=ttyS0,115200 /proc/cpuinfo: processor : 0 /proc/cpuinfo: model name : Feroceon rev 0 (v5l) /proc/cpuinfo: BogoMIPS : 333.33 /proc/cpuinfo: Features : swp half thumb fastmult edsp /proc/cpuinfo: CPU implementer : 0x41 /proc/cpuinfo: CPU architecture: 5TEJ /proc/cpuinfo: CPU variant : 0x0 /proc/cpuinfo: CPU part : 0x926 /proc/cpuinfo: CPU revision : 0 /proc/cpuinfo: /proc/cpuinfo: Hardware : HP Media Vault mv2120 /proc/cpuinfo: Revision : 0000 /proc/cpuinfo: Serial : 0000000000000000 /proc/iomem: 00000000-07ffffff : System RAM /proc/iomem: 00008000-00519923 : Kernel code /proc/iomem: 00562000-0060648f : Kernel data /proc/iomem: f1011000-f101101f : mv64xxx_i2c.0 /proc/iomem: f1011000-f101101f : mv64xxx_i2c.0 /proc/iomem: f1012000-f10120ff : serial8250.0 /proc/iomem: f1012000-f101201f : serial /proc/iomem: f1020108-f102010b : orion_wdt /proc/iomem: f1020300-f1020303 : orion_wdt /proc/iomem: f1050000-f1050fff : orion-ehci.0 /proc/iomem: f1060900-f10609ff : xor 0 low /proc/iomem: f1060b00-f1060bff : xor 0 high /proc/iomem: f1072000-f1075fff : ge00 base /proc/iomem: f1072004-f1072087 : ge00 mvmdio base /proc/iomem: f1080000-f1084fff : sata base /proc/iomem: f1090000-f109ffff : regs /proc/iomem: f10a0000-f10a0fff : orion-ehci.1 /proc/iomem: f2200000-f2201fff : sram /proc/iomem: f4000000-f407ffff : physmap-flash.0 /proc/iomem: f4000000-f407ffff : physmap-flash.0 /proc/interrupts: CPU0 /proc/interrupts: 1: 14414 orion_irq Level orion_tick /proc/interrupts: 4: 745 orion_irq Level serial /proc/interrupts: 6: 97 orion_irq Level mv64xxx_i2c /proc/interrupts: 22: 284 orion_irq Level eth0 /proc/interrupts: 23: 1180 orion_irq Level orion-mdio /proc/interrupts: 30: 67 orion_irq Level sata_mv[sata_mv.0] /proc/interrupts: 31: 2 orion_irq Level mv_xor.0 /proc/interrupts: 36: 0 orion_gpio0 36 Edge rtc-pcf8563 /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 124020 kB /proc/meminfo: MemFree: 85804 kB /proc/meminfo: MemAvailable: 84756 kB /proc/meminfo: Buffers: 0 kB /proc/meminfo: Cached: 21720 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 21676 kB /proc/meminfo: Inactive: 8276 kB /proc/meminfo: Active(anon): 21676 kB /proc/meminfo: Inactive(anon): 8276 kB /proc/meminfo: Active(file): 0 kB /proc/meminfo: Inactive(file): 0 kB /proc/meminfo: Unevictable: 0 kB /proc/meminfo: Mlocked: 0 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 124020 kB /proc/meminfo: LowFree: 85804 kB /proc/meminfo: SwapTotal: 0 kB /proc/meminfo: SwapFree: 0 kB /proc/meminfo: Dirty: 0 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 8284 kB /proc/meminfo: Mapped: 6144 kB /proc/meminfo: Shmem: 21720 kB /proc/meminfo: Slab: 4180 kB /proc/meminfo: SReclaimable: 1952 kB /proc/meminfo: SUnreclaim: 2228 kB /proc/meminfo: KernelStack: 472 kB /proc/meminfo: PageTables: 496 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: WritebackTmp: 0 kB /proc/meminfo: CommitLimit: 62008 kB /proc/meminfo: Committed_AS: 37240 kB /proc/meminfo: VmallocTotal: 901120 kB /proc/meminfo: VmallocUsed: 0 kB /proc/meminfo: VmallocChunk: 0 kB ----------------------------------------------------------------------------- Syslog ----------------------------------------------------------------------------- Aug 6 21:49:54 syslogd started: BusyBox v1.22.1 Aug 6 21:49:54 kernel: klogd started: BusyBox v1.22.1 (Debian 1:1.22.0-19) Aug 6 21:49:54 kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Aug 6 21:49:54 kernel: [ 0.000000] Linux version 4.6.0-1-marvell ( debian-ker...@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 Debian 4.6.4-1 (2016-07-18) Aug 6 21:49:54 kernel: [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f Aug 6 21:49:54 kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache Aug 6 21:49:54 kernel: [ 0.000000] Machine: HP Media Vault mv2120 Aug 6 21:49:54 kernel: [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff Aug 6 21:49:54 kernel: [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff Aug 6 21:49:54 kernel: [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff Aug 6 21:49:54 kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Aug 6 21:49:54 kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Aug 6 21:49:54 kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Aug 6 21:49:54 kernel: [ 0.000000] Ignoring unrecognised tag 0x41000403 Aug 6 21:49:54 kernel: [ 0.000000] Memory policy: Data cache writeback Aug 6 21:49:54 kernel: [ 0.000000] On node 0 totalpages: 32768 Aug 6 21:49:54 kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05b3a2c, node_mem_map c7ef9000 Aug 6 21:49:54 kernel: [ 0.000000] Normal zone: 256 pages used for memmap Aug 6 21:49:54 kernel: [ 0.000000] Normal zone: 0 pages reserved Aug 6 21:49:54 kernel: [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 Aug 6 21:49:54 kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Aug 6 21:49:54 kernel: [ 0.000000] pcpu-alloc: [0] 0 Aug 6 21:49:54 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Aug 6 21:49:54 kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 Aug 6 21:49:54 kernel: [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) Aug 6 21:49:54 kernel: [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Aug 6 21:49:54 kernel: [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Aug 6 21:49:54 kernel: [ 0.000000] Memory: 114624K/131072K available (3773K kernel code, 367K rwdata, 1416K rodata, 288K init, 289K bss, 16448K reserved, 0K cma-reserved, 0K highmem) Aug 6 21:49:54 kernel: [ 0.000000] Virtual kernel memory layout: Aug 6 21:49:54 kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Aug 6 21:49:54 kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) Aug 6 21:49:54 kernel: [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) Aug 6 21:49:54 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) Aug 6 21:49:54 kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Aug 6 21:49:54 kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Aug 6 21:49:54 kernel: [ 0.000000] .text : 0xc0008000 - 0xc0519924 (5191 kB) Aug 6 21:49:54 kernel: [ 0.000000] .init : 0xc051a000 - 0xc0562000 ( 288 kB) Aug 6 21:49:54 kernel: [ 0.000000] .data : 0xc0562000 - 0xc05bdcd0 ( 368 kB) Aug 6 21:49:54 kernel: [ 0.000000] .bss : 0xc05bdcd0 - 0xc0606490 ( 290 kB) Aug 6 21:49:54 kernel: [ 0.000000] NR_IRQS:16 nr_irqs:65 65 Aug 6 21:49:54 kernel: [ 0.000000] Switching to timer-based delay loop, resolution 6ns Aug 6 21:49:54 kernel: [ 0.000018] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns Aug 6 21:49:54 kernel: [ 10.599207] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns Aug 6 21:49:54 kernel: [ 10.599979] Console: colour dummy device 80x30 Aug 6 21:49:54 kernel: [ 10.600031] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=666666) Aug 6 21:49:54 kernel: [ 10.600065] pid_max: default: 32768 minimum: 301 Aug 6 21:49:54 kernel: [ 10.600277] Security Framework initialized Aug 6 21:49:54 kernel: [ 10.600302] Yama: disabled by default; enable with sysctl kernel.yama.* Aug 6 21:49:54 kernel: [ 10.600473] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.600506] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.602497] CPU: Testing write buffer coherency: ok Aug 6 21:49:54 kernel: [ 10.602777] ftrace: allocating 16337 entries in 32 pages Aug 6 21:49:54 kernel: [ 10.664194] Setting up static identity map for 0x8200 - 0x823c Aug 6 21:49:54 kernel: [ 10.669793] devtmpfs: initialized Aug 6 21:49:54 kernel: [ 10.672730] VFP support v0.3: not present Aug 6 21:49:54 kernel: [ 10.673181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Aug 6 21:49:54 kernel: [ 10.673819] pinctrl core: initialized pinctrl subsystem Aug 6 21:49:54 kernel: [ 10.676984] NET: Registered protocol family 16 Aug 6 21:49:54 kernel: [ 10.678070] DMA: preallocated 256 KiB pool for atomic coherent allocations Aug 6 21:49:54 kernel: [ 10.680123] cpuidle: using governor ladder Aug 6 21:49:54 kernel: [ 10.680165] cpuidle: using governor menu Aug 6 21:49:54 kernel: [ 10.680269] Orion ID: MV88F5182-A2. TCLK=166666667. Aug 6 21:49:54 kernel: [ 10.680664] initial MPP regs: 00000003 00000000 03ff0000 Aug 6 21:49:54 kernel: [ 10.680707] final MPP regs: 00000003 55550000 03ff5550 Aug 6 21:49:54 kernel: [ 10.697229] clocksource: Switched to clocksource orion_clocksource Aug 6 21:49:54 kernel: [ 10.739259] VFS: Disk quotas dquot_6.6.0 Aug 6 21:49:54 kernel: [ 10.739415] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.763610] NET: Registered protocol family 2 Aug 6 21:49:54 kernel: [ 10.765651] TCP established hash table entries: 1024 (order: 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.765721] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.765775] TCP: Hash tables configured (established 1024 bind 1024) Aug 6 21:49:54 kernel: [ 10.765948] UDP hash table entries: 256 (order: 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.766015] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) Aug 6 21:49:54 kernel: [ 10.766584] NET: Registered protocol family 1 Aug 6 21:49:54 kernel: [ 10.766729] PCI: CLS 0 bytes, default 32 Aug 6 21:49:54 kernel: [ 10.767341] Unpacking initramfs... Aug 6 21:49:54 kernel: [ 12.949123] Freeing initrd memory: 9108K (c0800000 - c10e5000) Aug 6 21:49:54 kernel: [ 12.950919] futex hash table entries: 256 (order: -1, 3072 bytes) Aug 6 21:49:54 kernel: [ 12.951131] audit: initializing netlink subsys (disabled) Aug 6 21:49:54 kernel: [ 12.951292] audit: type=2000 audit(2.328:1): initialized Aug 6 21:49:54 kernel: [ 12.952438] workingset: timestamp_bits=28 max_order=15 bucket_order=0 Aug 6 21:49:54 kernel: [ 12.952825] zbud: loaded Aug 6 21:49:54 kernel: [ 12.958896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) Aug 6 21:49:54 kernel: [ 12.959390] io scheduler noop registered Aug 6 21:49:54 kernel: [ 12.959527] io scheduler cfq registered (default) Aug 6 21:49:54 kernel: [ 12.961046] mv_xor mv_xor.0: Marvell shared XOR driver Aug 6 21:49:54 kernel: [ 12.996605] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) Aug 6 21:49:54 kernel: [ 12.997628] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Aug 6 21:49:54 kernel: [ 12.999458] console [ttyS0] disabled Aug 6 21:49:54 kernel: [ 13.019711] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 4, base_baud = 10416666) is a 16550A Aug 6 21:49:54 kernel: [ 13.473943] console [ttyS0] enabled Aug 6 21:49:54 kernel: [ 13.479546] physmap platform flash device: 00080000 at f4000000 Aug 6 21:49:54 kernel: [ 13.485741] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000b9 Aug 6 21:49:54 kernel: [ 13.496001] Amd/Fujitsu Extended Query Table at 0x0040 Aug 6 21:49:54 kernel: [ 13.501187] Amd/Fujitsu Extended Query version 1.0. Aug 6 21:49:54 kernel: [ 13.506274] physmap-flash.0: JEDEC Device ID is 0xB9. Assuming broken CFI table. Aug 6 21:49:54 kernel: [ 13.513692] physmap-flash.0: Swapping erase regions for top-boot CFI table. Aug 6 21:49:54 kernel: [ 13.520681] number of CFI chips: 1 Aug 6 21:49:54 kernel: [ 13.549422] Creating 1 MTD partitions on "physmap-flash.0": Aug 6 21:49:54 kernel: [ 13.555100] 0x000000000000-0x000000080000 : "firmware" Aug 6 21:49:54 kernel: [ 13.564862] mousedev: PS/2 mouse device common for all mice Aug 6 21:49:54 kernel: [ 13.571417] i2c /dev entries driver Aug 6 21:49:54 kernel: [ 13.576129] rtc-pcf8563 0-0051: chip found, driver version 0.4.4 Aug 6 21:49:54 kernel: [ 13.587959] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 Aug 6 21:49:54 kernel: [ 13.598371] ledtrig-cpu: registered to indicate activity on CPUs Aug 6 21:49:54 kernel: [ 13.605674] NET: Registered protocol family 17 Aug 6 21:49:54 kernel: [ 13.611942] registered taskstats version 1 Aug 6 21:49:54 kernel: [ 13.616432] zswap: loaded using pool lzo/zbud Aug 6 21:49:54 kernel: [ 13.623179] rtc-pcf8563 0-0051: setting system clock to 1970-08-06 21:49:44 UTC (18827384) Aug 6 21:49:54 kernel: [ 13.635509] Freeing unused kernel memory: 288K (c051a000 - c0562000) Aug 6 21:49:54 kernel: [ 13.641911] This architecture does not have kernel memory protection. Aug 6 21:49:54 kernel: [ 13.765202] random: systemd-udevd urandom read with 12 bits of entropy available Aug 6 21:49:54 kernel: [ 14.218436] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 Aug 6 21:49:54 kernel: [ 14.290007] libphy: PHY orion-mdio-mii:08 not found Aug 6 21:49:54 kernel: [ 14.613385] libphy: orion_mdio_bus: probed Aug 6 21:49:54 kernel: [ 14.692227] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:0a:e4:86:fd:05 Aug 6 21:49:54 kernel: [ 14.752297] SCSI subsystem initialized Aug 6 21:49:54 kernel: [ 14.927607] libata version 3.00 loaded. Aug 6 21:49:54 kernel: [ 14.944822] sata_mv sata_mv.0: version 1.28 Aug 6 21:49:54 kernel: [ 14.945014] sata_mv sata_mv.0: cannot get optional clkdev Aug 6 21:49:54 kernel: [ 14.996386] sata_mv sata_mv.0: slots 32 ports 2 Aug 6 21:49:54 kernel: [ 15.123508] scsi host0: sata_mv Aug 6 21:49:54 kernel: [ 15.160394] scsi host1: sata_mv Aug 6 21:49:54 kernel: [ 15.180300] ata1: SATA max UDMA/133 irq 30 Aug 6 21:49:54 kernel: [ 15.184496] ata2: SATA max UDMA/133 irq 30 Aug 6 21:49:54 kernel: [ 20.693299] ata1: link is slow to respond, please be patient (ready=0) Aug 6 21:49:54 kernel: [ 22.209326] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Aug 6 21:49:54 kernel: [ 22.235798] ata1.00: ATA-6: ST380023AS, 3.01, max UDMA/133 Aug 6 21:49:54 kernel: [ 22.241344] ata1.00: 156301488 sectors, multi 0: LBA Aug 6 21:49:54 kernel: [ 22.246451] ata1.00: applying bridge limits Aug 6 21:49:54 kernel: [ 22.257779] ata1.00: configured for UDMA/100 Aug 6 21:49:54 kernel: [ 22.263346] scsi 0:0:0:0: Direct-Access ATA ST380023AS 3.01 PQ: 0 ANSI: 5 Aug 6 21:49:54 kernel: [ 22.588829] ata2: SATA link down (SStatus 0 SControl 300) Aug 6 21:49:54 kernel: [ 22.737860] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) Aug 6 21:49:54 kernel: [ 22.770340] sd 0:0:0:0: [sda] Write Protect is off Aug 6 21:49:54 kernel: [ 22.775226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Aug 6 21:49:54 kernel: [ 22.777507] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 6 21:49:54 kernel: [ 22.816197] sda: sda1 Aug 6 21:49:54 kernel: [ 22.826789] sd 0:0:0:0: [sda] Attached SCSI disk Aug 6 21:50:02 preseed: successfully loaded preseed file from file:///preseed.cfg Aug 6 21:50:05 init: starting pid 967, tty '': '/sbin/reopen-console /sbin/debian-installer' Aug 6 21:50:05 init: starting pid 970, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog' Aug 6 21:50:07 debconf: Setting debconf/language to en Aug 6 21:50:07 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) Aug 6 21:50:07 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:50:07 main-menu[989]: INFO: Menu item 'ethdetect' selected Aug 6 21:50:09 kernel: [ 38.697341] random: nonblocking pool is initialized Aug 6 21:50:10 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Aug 6 21:50:10 net/hw-detect.hotplug: Detected hotpluggable network interface lo Aug 6 21:50:12 apt-install: Queueing package udev for later installation Aug 6 21:50:12 apt-install: Queueing package pciutils for later installation Aug 6 21:50:14 check-missing-firmware: looking at dmesg for the first time Aug 6 21:50:14 check-missing-firmware: saving timestamp for a later use: [ 38.697341] Aug 6 21:50:14 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Aug 6 21:50:14 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Aug 6 21:50:14 check-missing-firmware: no missing firmware in loaded kernel modules Aug 6 21:50:14 check-missing-firmware: taking network interface -n up/down Aug 6 21:50:14 check-missing-firmware: taking network interface eth0 up/down Aug 6 21:50:14 kernel: [ 43.970064] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down Aug 6 21:50:15 check-missing-firmware: looking at dmesg again, restarting from \[ 38.697341\] Aug 6 21:50:16 check-missing-firmware: timestamp found, truncating dmesg accordingly Aug 6 21:50:16 check-missing-firmware: saving timestamp for a later use: [ 43.970064] Aug 6 21:50:16 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Aug 6 21:50:16 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Aug 6 21:50:16 check-missing-firmware: no missing firmware in loaded kernel modules Aug 6 21:50:16 main-menu[989]: (process:1017): ip: SIOCGIFFLAGS: No such device Aug 6 21:50:16 main-menu[989]: (process:1017): ip: SIOCGIFFLAGS: No such device Aug 6 21:50:16 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) Aug 6 21:50:16 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:50:16 main-menu[989]: INFO: Menu item 'netcfg' selected Aug 6 21:50:16 main-menu[989]: INFO: Falling back to the package description for crypto-modules-4.6.0-1-marvell-di Aug 6 21:50:16 main-menu[989]: INFO: Falling back to the package description for crypto-modules-4.6.0-1-marvell-di Aug 6 21:50:16 netcfg[1396]: INFO: Starting netcfg v.1.138 Aug 6 21:50:16 netcfg[1396]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill. Aug 6 21:50:16 netcfg[1396]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline Aug 6 21:50:16 netcfg[1396]: INFO: Taking down interface eth0 Aug 6 21:50:17 netcfg[1396]: INFO: Taking down interface lo Aug 6 21:50:17 netcfg[1396]: INFO: Activating interface eth0 Aug 6 21:50:17 netcfg[1396]: DEBUG: State is now 0 Aug 6 21:50:17 netcfg[1396]: DEBUG: Want link on eth0 Aug 6 21:50:17 netcfg[1396]: INFO: Waiting time set to 3 Aug 6 21:50:17 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:17 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:18 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:19 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:20 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:20 netcfg[1396]: INFO: ethtool-lite: eth0: carrier down Aug 6 21:50:20 netcfg[1396]: INFO: Reached timeout for link detection on eth0 Aug 6 21:50:20 netcfg[1396]: DEBUG: Commencing network autoconfiguration on eth0 Aug 6 21:50:20 netcfg[1396]: DEBUG: rdnssd started; PID: 1411 Aug 6 21:50:20 kernel: [ 49.476308] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled Aug 6 21:50:20 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:20 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:20 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:20 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:20 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:20 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:20 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:20 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:21 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:21 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:21 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:21 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:21 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:21 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:21 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:21 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:22 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:22 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:22 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:22 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:22 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:22 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:22 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:23 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:23 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:23 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:23 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:23 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:23 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:23 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:23 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:23 netcfg[1396]: DEBUG: nc_v6_interface_configured(eth0, scope local) Aug 6 21:50:23 netcfg[1396]: DEBUG: Running ip addr show eth0 to look for address Aug 6 21:50:23 netcfg[1396]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Aug 6 21:50:23 netcfg[1396]: DEBUG: ip line: link/ether 00:0a:e4:86:fd:05 brd ff:ff:ff:ff:ff:ff Aug 6 21:50:23 netcfg[1396]: INFO: No IPv6 support found... how does that happen? Aug 6 21:50:23 netcfg[1396]: DEBUG: Stopping rdnssd, PID 1411 Aug 6 21:50:23 netcfg[1396]: DEBUG: No RA received; attempting IPv4 autoconfig Aug 6 21:50:23 netcfg[1396]: WARNING **: Started DHCP client; PID is 1437 Aug 6 21:50:23 udhcpc: Got IP 192.168.0.8 (using eth0) and routing through 192.168.0.1 Aug 6 21:50:27 netcfg[1396]: DEBUG: Reading domain name returned via DHCP Aug 6 21:50:27 netcfg[1396]: DEBUG: DHCP domain name is 'home.lan' Aug 6 21:50:27 netcfg[1396]: DEBUG: Reading nameservers from /etc/resolv.conf Aug 6 21:50:27 netcfg[1396]: DEBUG: Read nameserver 192.168.0.2 Aug 6 21:50:27 netcfg[1396]: DEBUG: Read nameserver 192.168.0.11 Aug 6 21:50:27 netcfg[1396]: DEBUG: State is now 1 Aug 6 21:50:27 netcfg[1396]: DEBUG: State is now 2 Aug 6 21:50:27 netcfg[1396]: DEBUG: State is now 5 Aug 6 21:50:27 netcfg[1396]: DEBUG: Using DNS to try and obtain default hostname Aug 6 21:50:27 netcfg[1396]: DEBUG: Getting default hostname from rDNS lookup of autoconfigured address 192.168.0.8 Aug 6 21:50:27 netcfg[1396]: DEBUG: Hostname found: backup.home.lan Aug 6 21:50:27 netcfg[1396]: DEBUG: backup.home.lan is a valid FQDN Aug 6 21:50:27 netcfg[1396]: DEBUG: We have a real FQDN Aug 6 21:50:27 netcfg[1396]: DEBUG: Preseeding domain from global: home.lan Aug 6 21:50:27 netcfg[1396]: DEBUG: State is now 6 Aug 6 21:50:27 netcfg[1396]: DEBUG: Network config complete Aug 6 21:50:27 netcfg[1396]: DEBUG: No interface given; clearing /etc/network/interfaces Aug 6 21:50:27 netcfg[1396]: DEBUG: Writing informative header Aug 6 21:50:27 netcfg[1396]: DEBUG: Success! Aug 6 21:50:27 netcfg[1396]: DEBUG: Writing loopback interface Aug 6 21:50:27 netcfg[1396]: DEBUG: Success! Aug 6 21:50:27 netcfg[1396]: DEBUG: Writing DHCP stanza for eth0 Aug 6 21:50:27 netcfg[1396]: INFO: Detected eth0 as a hotpluggable device Aug 6 21:50:27 netcfg[1396]: DEBUG: Success! Aug 6 21:50:28 main-menu[989]: (process:1395): udhcpc (v1.22.1) started Aug 6 21:50:28 main-menu[989]: (process:1395): Sending discover... Aug 6 21:50:28 main-menu[989]: (process:1395): Sending select for 192.168.0.8... Aug 6 21:50:28 main-menu[989]: (process:1395): Lease of 192.168.0.8 obtained, lease time 3600 Aug 6 21:50:28 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) Aug 6 21:50:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:50:28 main-menu[989]: INFO: Menu item 'network-console' selected Aug 6 21:50:49 sshd[1498]: Server listening on 0.0.0.0 port 22. Aug 6 21:50:49 apt-install: Queueing package openssh-server for later installation Aug 6 21:50:55 sshd[1516]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus Aug 6 21:51:05 sshd[1516]: Accepted password for installer from 192.168.0.160 port 56579 ssh2 Aug 6 21:51:05 sshd[1518]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory Aug 6 21:51:05 sshd[1518]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory Aug 6 21:51:07 debconf: Setting debconf/language to en Aug 6 21:51:11 debconf: Setting debconf/priority to low Aug 6 21:51:11 debconf: Setting debconf/language to en Aug 6 21:51:11 main-menu[1531]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) Aug 6 21:51:11 main-menu[1531]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:11 main-menu[1531]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:13 main-menu[1531]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:13 main-menu[1531]: INFO: Menu item 'choose-mirror' selected Aug 6 21:51:13 main-menu[1531]: WARNING **: Unable to set title for choose-mirror. Aug 6 21:51:14 anna-install: Queueing udeb apt-mirror-setup for later installation Aug 6 21:51:14 main-menu[1531]: (process:1557): Segmentation fault Aug 6 21:51:14 main-menu[1531]: WARNING **: Configuring 'choose-mirror' failed with error code 139 Aug 6 21:51:14 main-menu[1531]: WARNING **: Menu item 'choose-mirror' failed. Aug 6 21:51:14 main-menu[1531]: WARNING **: Unable to set title for choose-mirror. Aug 6 21:51:14 main-menu[1531]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:28 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) Aug 6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:51:28 main-menu[989]: INFO: Menu item 'choose-mirror' selected Aug 6 21:51:28 main-menu[989]: WARNING **: Unable to set title for choose-mirror. Aug 6 21:51:28 main-menu[989]: (process:1587): Segmentation fault Aug 6 21:51:28 main-menu[989]: WARNING **: Configuring 'choose-mirror' failed with error code 139 Aug 6 21:51:28 main-menu[989]: WARNING **: Menu item 'choose-mirror' failed. Aug 6 21:51:28 main-menu[989]: WARNING **: Unable to set title for choose-mirror. Aug 6 21:51:28 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:52:22 main-menu[989]: INFO: Modifying debconf priority limit from 'high' to 'medium' Aug 6 21:52:22 debconf: Setting debconf/priority to medium Aug 6 21:52:22 main-menu[989]: DEBUG: resolver (libgcc1): package doesn't exist (ignored) Aug 6 21:52:23 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:52:23 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:52:34 main-menu[989]: INFO: Falling back to the package description for choose-mirror Aug 6 21:52:34 main-menu[989]: INFO: Menu item 'save-logs' selected Aug 6 21:53:08 kernel: [ 218.089782] TCP: request_sock_TCP: Possible SYN flooding on port 80. Sending cookies. Check SNMP counters. Aug 6 21:53:25 kernel: [ 234.906280] TCP: request_sock_TCP: Possible SYN flooding on port 80. Sending cookies. Check SNMP counters. ----------------------------------------------------------------------------- On Sat, Jul 30, 2016 at 7:23 PM, Martin Michlmayr <t...@cyrius.com> wrote: > Mike, can you please give these instructions a go? This is what I > intend to post to the mv2120 list. > > -- > > Mike Thompson reported that Debian stretch (the upcoming Debian 9) > doesn't boot on the HP mv2120 anymore. I don't know how many Debian > users are left who run Debian on their mv2120. I gave away my device > several years ago. Recently I bought an mv2120 from eBay in order to > debug this issue. > > While I found a solution, it requires users to change a setting on their > device. Please make sure to make this change, otherwise your device > will no longer boot when you upgrade to Debian 9. > > The new settings are compatible with Debian 8 (jessie) and Debian 9 > (stretch), so I suggest you make the changes now. > > If you have serial console access to the mv2120, you can run some > commands in u-boot. Simply interrupt the boot process by pressing a key > and type the following: > > setenv loadAddr 0x0600000 > setenv bootcmd 'bootext2 0,1:1,2 0x0600000 /boot/uImage /dev/sda > /dev/sdb' > saveenv > > If you don't have a serial console, you can make the changes from within > Debian. Run the following commands: > > cat >/etc/fw_env.config <<EOF > /dev/mtd0 0x00000 0x1000 0x20000 > EOF > > fw_setenv loadAddr 0x0600000 > fw_setenv bootcmd "bootext2 0,1:1,2 0x0600000 /boot/uImage /dev/sda > /dev/sdb" > > This will create a config file so you can modify the u-boot environment > and use fw_setenv to update two boot variables. > > Once you made the changes, upgrades to Debian 9 should work fine and you > can also use the Debian installer if you want to perform a new > installation. > > Please note that Debian 9 will be the last release to support the HP > mv2120. > > -- > > Note that the installer from > > https://d-i.debian.org/daily-images/armel/daily/orion5x/network-console/hp/mv2120/netboot.img > will not boot right now with these settings. However, you can change the > loadAddr to 0x0500000 and it should work. I just commited a fix in Git so > it should work in a day or so with 0x0600000. > > -- > Martin Michlmayr > http://www.cyrius.com/ >