For what it’s worth, I just tried booting with an HDMI monitor connected to see if the silence on the serial-port was just a matter of console messages being directed to the HDMI video port instead. Still no go. Silence all-round.
Rick > On Aug 22, 2016, at 9:15 PM, Rick Thomas <rbtho...@pobox.com> wrote: > > I can confirm this problem. I just got thru running a “stretch” install on > my test Cuboxi4Pro with ingredients from: > >> wget >> http://ftp.us.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gz >> wget >> http://ftp.us.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/firmware.MX6_Cubox-i.img.gz >> wget >> http://ftp.us.debian.org/debian/dists/stretch/main/installer-armhf/current/images/netboot/SD-card-images/README.concatenateable_images > > To be absolutely clear which components: >> -rw-r--r-- 1 rbthomas rbthomas 871 Jun 29 15:56 >> README.concatenateable_images >> -rw-r--r-- 1 rbthomas rbthomas 187261 Jun 29 15:56 >> firmware.MX6_Cubox-i.img.gz >> -rw-r--r-- 1 rbthomas rbthomas 24210806 Jun 29 15:56 partition.img.gz > > I got the same results as Rainer. System would not boot after installation. > There was nothing at all on serial-port the console. > > I also tried power-cycling the device. Nothing on the serial-port console. > > Can somebody tell me how to find out if there is a bootable u-boot on the SD > card? Maybe the u-boot is getting clobbered by something in the installation > process? > > Let me know if you want log files, etc... > > Rick > >> On Aug 21, 2016, at 10:44 AM, Martin Michlmayr <t...@cyrius.com> wrote: >> >> * Rainer Dorsch <m...@bokomoko.de> [2016-08-21 10:41]: >>> The boot loader installation did not show an error, but the device did not >>> boot. >>> >>> The last "words" of the installer: >>> >>> lqqqqqqqqqqqqqqqqqqqqqu Finishing the installation tqqqqqqqqqqqqqqqqqqqqqqk >>> x x >>> x 95% x >>> x x >>> The system is going down NOW!ystem... >>> x >>> Sent SIGKILL to all processes >>> x >>> Requesting system >>> rebootqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj >>> [ 2730.956106] reboot: Restarting system >> >> Can you 1) attach /var/log/installer/syslog from the SD card and b) >> show the boot log (after the installer). >> >> -- >> Martin Michlmayr >> http://www.cyrius.com/ >> >