I got a machine supplied with RedHat. I don't want RedHat (obviously). I have tried booting the standard and compact kernels.
No SCSI devices are detected so I cannot continue the install. (I was planning on setting up Software Raid (md) like the below config) The dmesg output from RedHat is provided... A little push in the right direction would be helpful. dmesg: DE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio hda: SAMSUNG CD-ROM SC-152A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 65536 buckets, 512Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 283k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 aic79xx: PCI4:2:1 MEM region 0x0 unavailable. Cannot memory map device. nvram_scb == 0xfe SCBPTR == 0xff Signature = BIOS aic79xx: PCI4:2:0 MEM region 0x0 unavailable. Cannot memory map device. nvram_scb == 0xfe SCBPTR == 0xff Signature = BIOS scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0 <Adaptec aic7902 Ultra320 SCSI adapter> aic7902: Ultra320 WideChannel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0 <Adaptec aic7902 Ultra320 SCSI adapter> aic7902: Ultra320 WideChannel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Vendor: SEAGATE Model: ST318453LC Rev: 0005 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:3:0: Tagged Queuing enabled. Depth 253 Vendor: SEAGATE Model: ST318453LC Rev: 0005 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST318453LC Rev: 0005 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST318453LC Rev: 0005 Type: Direct-Access ANSI SCSI revision: 03 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]