Package: installation-reports Version: beta-1 Severity: critical INSTALL REPORT
Debian-installer-version: 2003/11/16, http://gluck.debian.org/cdimage/testing/netinst/i386/beta-1/sarge-i386-businesscard.iso uname -a: n/a Date: 2003/11/16 17:20 EST Method: Attempted to install from 50MB CD image. Booted from CD via SCSI BIOS Machine: homebuilt whitebox Processor: Intel PII (Deschutes) 375 Memory: 512MB Root Device: n/a (didn't get that far) Root Size/partition table: n/a (didn't get that far) Output of lspci: (from a boot of RH 7.2, since I couldn't get installed) 00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) 00:02.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) 00:02.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) 00:02.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) 00:02.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) 00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 03) 00:0e.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 02)00:0f.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d69 (rev 02) 00:10.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d69 (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [ ] Config network: [ ] Detect CD: [E] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Booted from SCSI CD and selected the installation langauge. The hardware detection ran, but couldn't find the CD. I attempted to use manual configuration, but didn't see an appropriate option. Same problem with the 2003/11/15 daily build. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]