Debian-installer-version: http://www.mmweg.rwth-aachen.de/~sebastian.ley/d-i/netinst-image-i386/daily-2003-11-19/ uname -a: Linux localhost 2.4.22-1-i386 #9 Sat Oct 4 14:30:39 EST 2003 i686 GNU/Linux Date: Sat Oct 4 14:30:39 Method: CD-ROM (Sarge netinst image) Machine: Desktop PC Processor: Athlon 1 GHz Memory: 512 MB Root Device: IDE hard drive (hda)
Root Size/partition table: /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> /dev/hda1 / ext2 defaults,errors=remount-ro 0 1 proc /proc proc defaults 0 0 /dev/hda5 none swap sw 0 0 /dev/fd0 /floppy auto rw,user,noauto 0 0 /dev/hdc /cdrom auto ro,user,noauto 0 0
df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda1 31475540 669028 29207648 3% /
Output of lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) 00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 16) 00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 00:10.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02) 00:11.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86) 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 03)
Base System Installation Checklist:
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [E] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Manually HDD partitioning didn't work. cfdisk quit's with an error. Used automatic partitioning. Nice work guys! I'am very happy with the new installer!
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
