D-I can't find my IDE-controller (was: Intall Failure - Partitioning fails)

[Thomas Kalve Pedersen]

Sven Luther wrote:

On Thu, Jan 29, 2004 at 10:37:57AM -0500, Erik Dykema wrote:
 

Sure, it says this:

$> parted
Error: No Device Found
Retry / Cancel?
   

Check the device you actually have, and then parted /dev/<device>.

But then, maybe you don't have the correct driver for your hardware or
something.
 

This happens to me also, on my HP Nc4000. The IDE-controller does not 
appear in dmesg at all.
Normally, (taken from a "Debian on Nc4000"-HOWTO), look at this:

dmesg output: http://www.krattet.no/misc/dmesg
lscpi: http://www.krattet.no/misc/lspci
lspci -v: http://www.krattet.no/misc/lspciv
lspci -vv: http://www.krattet.no/misc/lspcivv
(All stolen from http://www.cyrius.com/)
It could be worth saying I used 2004-01-28 and 29 builds while trying. 
(All before that couldn't use the tg3-driver i need for my ethernet)

--
Thomas Kalve Pedersen <[EMAIL PROTECTED]>
                                         "So we agreed to disagree."
                                                   -- Gerry Rafferty


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]