Bug#239019: Debian Installer Installation Report

[Daniel Burton]

Package: installation-reports

Debian-installer-version: Beta 3 from official website
uname -a: Linux wombat 2.4.25-1-686 #1 Tue Feb 24 10:55:59 EST 2004 i686 GNU/Linux
Date: March 19th, 2004
Method: Network install with 100MB CD image -- installed off of 
http://linux.csua.berkeley.edu/debian with distribution "testing"
Machine: Compaq Evo N620c
Processor: Pentium M
Memory: 512MB
Root Device: /dev/hda1
Root Size/partition table:
        Disk /dev/hda: 60.0 GB, 60011642880 bytes
        16 heads, 63 sectors/track, 116280 cylinders
        Units = cylinders of 1008 * 512 = 516096 bytes
        Device Boot      Start         End      Blocks   Id  System
        /dev/hda1               1      106569    53710744+  83  Linux
        /dev/hda2          106570      116280     4894344   82  Linux swap
Output of lspci:

   00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller
   (rev 03)
   00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller
   (rev 03)
   00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
   00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
   00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
   00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
   00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83)
   00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller
   (rev 03)
   00:1f.1 IDE interface: Intel Corp. 82801DBM Ultra ATA Storage
   Controller (rev 03)
   00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio
   Controller (rev 03)
   00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 03)
   01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
   Mobility M7 LW [Radeon Mobility 7500]
   02:06.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller
   (rev 01)
   02:06.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller
   (rev 01)
   02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M
   Gigabit Ethernet (rev 01)
Base System Installation Checklist:

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:

Installing GRUB took about 5 minutes.  It stopped for a long time while detecting the BIOS drives, but finally finished.



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]