-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 package:installation-reports
Debian-installer-version: beta3 , i get it the 20-03-04 uname -a: cant with the debian , with the gentoo :Linux Narsil 2.6.3-gentoo-r1 #12 SMP Mon Mar 15 16:30:42 UTC 2004 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux Date: 20-03-04 installation time like 10 minutes (nice) Method: installed from the iso named "sarge-i386-netinst.iso" Machine: custom machine p4 2.4 motherboard asus p4c800 ,etc... nothing interesting for the objective of my report Processor:p4 2.4 800 HT Memory: 512 Root Device: IDE > /dev/hda2 Root Size/partition table: /dev/hda1 > gentoo root /dev/hda2 > debian partition to test /dev/hda3 > grub partition (/boot of the gentoo system) /dev/hda5 > swap (512mb) and a windows partition on a sata disk Output of lspci:(again on the gentoo installation) 00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT] 01:00.1 Display controller: ATI Technologies Inc RV350 NJ [Radeon 9800 XT] (Secondary) 02:05.0 Ethernet controller: 3Com Corporation 3c940 1000Base? (rev 12) 02:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 02:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems:well the problems comes because i already have a grub installation on the hd , and when i select to install the grub of the live cd the installer simply blocks , also i would like to know the grub parameter to try to boot the debian from the gentoo installed grub(who is in a 100mbs partition /dev/hda2) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAXGxWIhATqmKOK3MRAqFWAJ0Y5tgpppHUIO58wEOZPCW1ACfriwCfT+jX 64qhIGxUXByYUZHr3X3n81o= =drvC -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
