Package: installation-reports

Debian-installer-version: <5/11/04 debian.org>
uname -a: <Linux malaysia 2.4.26kps #1 SMP Sun May 2 17:40:22 CDT 2004 i686 GNU/Linux !! now installs 2.4.25 orig>
Date: <5/5/04>
Method: <CD boot network via DSL, not Proxied>


Machine: <Intel D865PERL sith SATA drives>
Processor: P4
Memory: 512MB
Root Device: <IDE SATA originally HDE3 now MD2 >
Root Size/partition table: <See http://xtronics.com/reference/SATA-RAID-Debian.htm>
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02)
0000:00:03.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to CSA Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2)
0000:02:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet Controller (LOM)
0000:03:07.0 FireWire (IEEE 1394): Lucent Microelectronics FW323 (rev 61)



Base System Installation Checklist:


Initial boot worked:    [O ]
Configure network HW:   [O ]
Config network:         [O ]
Detect CD:              [O ]
Load installer modules: [O ]
Detect hard drives:     [O ]
Partition hard drives:  [O ]
Create file systems:    [O ]
Mount partitions:       [O ]
Install base system:    [O ]
Install boot loader:    [O ]
Reboot:                 [O ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Comments/Problems:

There was a problem converting this systme to RAID.
/lib/modules/2.4.25kps2/kernel/drivers/md did not contain raid1.o !!
rebooting degraded raid on /dev/md2 would fail with out giving clues - much time to figure this one out.


mkinitrd did not report error and only when I updated to 2.4.26 did I get the needed driver.

Really need RAID install support with LVM


-- ---------------------------------------------------------------- Karl Schmidt EMail [EMAIL PROTECTED] Transtronics, Inc. WEB http://xtronics.com 3209 West 9th Street Ph(785) 841-3089 Lawrence, KS 66049 FAX(785) 841-0434


He's about a quarter turn past hand tight. ----------------------------------------------------------------


-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Reply via email to