Package: installation-reports Debian-installer-version: jbailey's 21.06.2004 daily build uname -a: Linux caradhras 2.4.26-32-smp #1 SMP Thu Apr 29 03:20:53 UTC 2004 parisc GNU/Linux Date: Mon Jun 21 13:33:07 EDT 2004 Method: Network booted from local TFTP server.
Machine: HP Visualize B180L+ Processor: PA7300LC 180MHz Memory: 416784k Root Device: /dev/sda Root Size/partition table: Device Boot Start End Blocks Id System /dev/sda1 1 31 31728 f0 Linux/PA-RISC boot /dev/sda2 32 275 249856 82 Linux swap /dev/sda3 * 276 1740 1500160 83 Linux /dev/sda4 1741 4091 2407424 83 Linux sda3 is root, sda4 is /home Output of lspci: caradhras:~# lspci 0000:00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04) 0000:00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: System came up fine! Used tasksel to install a few tasks with no issues. The only conceivable problem is that in my xterm running minicom to the B180, tasksel does not highlight what you currently have tabbed, which meant I had to play guessing games to figure out how to hit "Finish." Will try using aptitude on tomorrow's build. Will try tc2 with a cd-rom boot, when it's released. Thanks! -- Kyle McMartin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]