Package: installation-reports INSTALL REPORT
Debian-installer-version: Release Candidate 1 (downloaded 23.06.04) uname -a: 2.4.25-powerpc (sorry I already replaced the kernel ;)) Date: 23.06.04 14:00 CEST Method: I download the business card image and installed over the net from ftp2.de.debian.org. Machine: Apple Powerbook G4 (2004) 1,5Ghz Processor: PPC 7447A Memory: 512 MB Ram Root Device: OTHSBI AKM0852AG S (80 Gb IDE 2,5") Root Size/partition table: /dev/hda # type name length base ( size ) system /dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map /dev/hda2 Apple_Bootstrap untitled 19532 @ 64 ( 9.5M) NewWorld bootblock /dev/hda3 Apple_Bootstrap untitled 13671876 @ 19596 ( 6.5G) NewWorld bootblock /dev/hda4 Apple_UNIX_SVR2 untitled 63720704 @ 13691472 ( 30.4G) Linux native /dev/hda5 Apple_HFS Apple_HFS_Untitled_3 77888520 @ 78412952 ( 37.1G) HFS /dev/hda6 Apple_UNIX_SVR2 swap 1000776 @ 77412176 (488.7M) Linux swap /dev/hda7 Apple_Free Extra 16 @ 156301472 ( 8.0k) Free space Block size=512, Number of Blocks=156301488 DeviceType=0x0, DeviceId=0x0 # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda3 / ext3 defaults,errors=remount-ro 0 1 /dev/hda4 /home ext3 defaults 0 2 /dev/hda6 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 Output of lspci and lspci -n: lscpi: 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:01:12.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 03) 0001:01:13.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller 0001:01:17.0 Class ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:01:1b.0 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.1 USB Controller: NEC Corporation USB (rev 43) 0001:01:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:06:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:06:0d.0 Class ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0002:06:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0002:06:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) lspci -n: 0000:00:0b.0 Class 0600: 106b:0034 0000:00:10.0 Class 0300: 1002:4e50 0001:01:0b.0 Class 0600: 106b:0035 0001:01:12.0 Class 0280: 14e4:4320 (rev 03) 0001:01:13.0 Class 0607: 104c:ac56 0001:01:17.0 Class ff00: 106b:003e 0001:01:18.0 Class 0c03: 106b:003f 0001:01:19.0 Class 0c03: 106b:003f 0001:01:1a.0 Class 0c03: 106b:003f 0001:01:1b.0 Class 0c03: 1033:0035 (rev 43) 0001:01:1b.1 Class 0c03: 1033:0035 (rev 43) 0001:01:1b.2 Class 0c03: 1033:00e0 (rev 04) 0002:06:0b.0 Class 0600: 106b:0036 0002:06:0d.0 Class ff00: 106b:003b 0002:06:0e.0 Class 0c00: 106b:0031 (rev 81) 0002:06:0f.0 Class 0200: 106b:0032 (rev 80) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: I was really impressed how smooth the installation was, you did a great job with the new installer, this was my fist ppc installation ever and I got through the procedure without any problems, even the MacOSX is able too boot. The autopartioning was also very good and did everything without a problem. Thank you for the really good work. The only things currenty not working are the sound and the airport extreme, but they are currently not supportet, but thats not your fault :). Thank you again, I'm still very impressed. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]