Hello ! My real problem is that I have an MSI 875P v2 motherboard and I have made a (ICH5) SATA raid array from two serial HDD. I tried to install the sarge from the official netboot and from the cdboot image but the kernel didn't see the SATA raid array. I made my on kernel image and I put it into the boot image. Now the booting kernel saw the array as /dev/sda but the install proceudre didn't saw the RAM disk however I set it in the kernel.
Szabolcs On Mon, 12 Jul 2004, Geert Stappers wrote: > On Mon, Jul 12, 2004 at 04:10:05PM +0200, Toth Szabolcs wrote: > > > > Dear Geert ! > Yes, it was a private message > > > On Mon, 12 Jul 2004, Geert Stappers wrote: > > > > > On Mon, Jul 12, 2004 at 02:35:47PM +0200, Toth Szabolcs wrote: > > > > > > > > Hello ! > > > > > > > > I'm missing the kernel-config file of the sarge install please put it > > > > aside the kernel image in the future like by the older release and please > > > > send it me by mail now I would really need it. > > > > > > Strange, computers that I installed with debian-installer > > > have in the directory /boot a config file. > > > > > > Otherwise > > > Debian-installer uses the regular Debian kernels, > > > so you can extract the .deb `dpkg -x kernel-image-2.x.y.z_arch.deb` > > > and use that kernel configuration file. > > > > > > > My problem is that I was unable to install the sarge distribution beause > > the intaller didn't reconginse my SATA controller. I made my own 2.6.x > > kernel image that reconise the HDD but the booting process didn't see the > > ram drive however I set it in the kernel config. Have you any idea what > > did I wrong ? > > "wrong???", I have no interrest in telling what you do wrong ;-) > > There are several things that you could do better: > > - talk with the community and be part of the community (no private E-mail about > this topic) > - tell what you really want (your SATA controller recognised) > - show that put some effort in it to achieve it > (e.g. tell that you allready build a kernel to solve your problem ) > > > > > Szabolcs Toth > > Cheers > Geert Stappers > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]