Package: installation-reports Debian-installer-version: Release Candidate 1 uname -a: N/A Date: Sun Aug 8 14:49:42 CEST 2004 Method: Booted from CD
Machine: Hewlett Packard 9000-712/60 Processor: PA-Risc 1.1d - PA7100 LC (PCX-L) Memory: 64 MB Root Device: SCSI, /dev/sda Root Size/partition table: N/A Output of lspci: N/A Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [0] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: --When selecting the Belgian keyboard layout, I got the error message 'An installation step failed: Select a keyboard layout'. On /dev/tty4 I could read: do_page_fault pid=1065 command='kbd-chooser' type=15 address=0x00000002 segmentation fault (this is not the complete output) I chose the 'American English' keyboard and the installer continued. -When installing the base system, the installation seemed to stall on 'Retrieving console-data'. I waited for more than half an hour, but the installer did not continue. On /dev/tty2, I could see that a 'cp'-command was running. When I tried to manually copy the file (console-data) the shell also blocked. I burned the image on another cd, but the problem persisted. I even tried another machine --> same problem. I could mount the cd and copy the file without problems on my i386 machine. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]