Package: installation-reports Debian-installer-version: RC-1 uname -a: Linux clos 2.4.26 #1 SMP Fri Apr 16 10:09:37 AKDT 2004 i686 GNU/Linux
Debian-installer-version: > uname -a: <The result of running uname -a on a shell prompt> Date: 8/9/04 3:30pm AKDT Method: Used Network install iso, local mirror. Machine: custom Processor:2 x PIII 1gz Memory:2gb Root Device: SCSI sda5 Root sda1 Primary Linux swap 255.86 sda2 Boot Primary Linux ext3 50.34 /boot sda3 Boot Primary Linux ext3 50.34 sda5 Boot Logical Linux ext3 299.90 /root sda6 Logical Linux ext3 4999.62 /usr sda7 Logical Linux ext3 1000.35 /var sda8 Logical Linux ext3 8416.92 sda9 Logical Linux ext3 500.18 /tmp sda10 Logical Linux swap 786.44 Logical Free Space 2013.27 sdb1 Primary Linux XFS 26000.50 /usr/local sdb2 Primary Linux XFS 10702.82 /home sdc1 Primary Linux swap 1024.46 sdc2 Primary Linux XFS 35678.85 /pub hda1 Primary Linux ext3 120034.13 /mnt/pub output of lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 0000:00:09.0 SCSI storage controller: Advanced System Products, Inc ABP940-UW 0000:00:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875J (rev 04) 0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:00:0c.0 USB Controller: NEC Corporation USB (rev 41) 0000:00:0c.1 USB Controller: NEC Corporation USB (rev 41) 0000:00:0c.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 0000:00:0d.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02) 0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 85) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [E] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems:The linux26 kernel apparently does not have the driver for my scsi card. The driver is for the symbios chipset, sym53c8xx, or the ncr53c7,8xx. The 2.4 kernel works fine in RC-1. Only the IDE drive shows up in the partitioner for the 2.6 kernel, install stops there. -- Greg Madden Precision Air Balance, Inc. Phone: 907-276-0461 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]