On Monday, August 9, 2004, at 03:55 PM, Rick_Thomas wrote:
OK, as I said, output of lspci and lspci -n will be sent tonight, when I
can get my hands on the machine in question.
Here is the output of "lspci ; lspci -n"
Hope it helps!
BTW, I manually did "modprobe ohci1394 ; modprobe sbp2" just before the "discover disk hardware" phase to get this. Out of curiosity, I let the installation proceed (even though I knew it was doomed, because at reboot time the initrd wouldn't know that it would be necessary to load those two modules.) When the time came to install yaboot, it failed. Contents of /var/log are available on request if you think it will help to take a look. Also, I can repeat the process with a higher debug level, if that would help.
Rick
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
0000:01:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 PCI
0000:01:17.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0000:01:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0000:01:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0000:02:0b.0 Host bridge: Apple Computer Inc. UniNorth 1.5 Internal PCI
0000:02:0e.0 FireWire (IEEE 1394): Lucent Microelectronics FW323
0000:02:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01)
0000:00:0b.0 0600: 106b:002d
0000:00:10.0 0300: 1002:5157
0000:01:0b.0 0600: 106b:002e
0000:01:17.0 ff00: 106b:0022 (rev 03)
0000:01:18.0 0c03: 106b:0019
0000:01:19.0 0c03: 106b:0019
0000:02:0b.0 0600: 106b:002f
0000:02:0e.0 0c00: 11c1:5811
0000:02:0f.0 0200: 106b:0021 (rev 01)
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]