Package: installation-reports Debian-installer-version: pre-rc2 uname -a: Linux stacy.modallport.com.br 2.6.8-1-i386 #1 SMP Qui Out 14 10:59:28 BRT 2004 i686 GNU/Linux Date: Qui Out 14 09:00:00 BRT 2004 Method: I'm installed from Cd image sarge-netinst pre-rc2, and I was installed only the base system of the CD.
Machine: Personal Computer (generic) Processor: Pentium IV 1700MHz 256KB cache Memory: 512MB PC133 Root Device: IDE - /dev/hda3 Root Size/partition table: 5GB Output of lspci and lspci -n: 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 12) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12) 02:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) 02:03.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 02:04.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 02:05.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c) lspci -n 00:00.0 Class 0600: 8086:1a30 (rev 03) 00:01.0 Class 0604: 8086:1a31 (rev 03) 00:1e.0 Class 0604: 8086:244e (rev 12) 00:1f.0 Class 0601: 8086:2440 (rev 12) 00:1f.1 Class 0101: 8086:244b (rev 12) 00:1f.3 Class 0c05: 8086:2443 (rev 12) 02:00.0 Class 0300: 1002:4c4d (rev 64) 02:03.0 Class 0200: 10b7:9200 (rev 74) 02:04.0 Class 0200: 10b7:9055 (rev 30) 02:05.0 Class 0200: 10b7:9200 (rev 6c) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [0] Configure network HW: [0] Config network: [0] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [0] Create file systems: [0] Mount partitions: [0] Install base system: [0] Install boot loader: [0] Reboot: [0] Comments/Problems: After reboot, the system execute the base-config with sucess, but on screen of choose the packages to install, I,m select, "install packages manually" and the base-config show me a screen of error saying "the selected packages not found" and in the /var/log/messages appear this line: "Kernel: reiserFS: hda6: warning: vs-8115: get_num_ver: not directory item" hda6 is my /tmp