Thanks for the reply,. So how do I actually get the boot.img to boot?
I've set up open firmware (version 2.0) to have the display as output and the keyboard as input, and auto-boot to false. But, I've tried what seems every combination of boot fd or boot floppy to no avail. I'll usually get back can't LOAD. And really, the main problem with my woody install is that when I reboot, I get "CLAIM FAILED". But, as long as these images should work I'll try them some more. Also, another note, I don't have MacOS (although I'd probably be able to get it if I needed to, but I'd rather not have to worry about it if I can). I'm at work now but I'll try some more tonight and give some more exact details of what I'm trying and what the error messages are. Thanks again, Wade On Mon, 2004-11-08 at 18:59 +0100, Sven Luther wrote: > On Mon, Nov 08, 2004 at 09:19:12AM -0700, Wade Berrier wrote: > > Hi Malte, > > > > I found a message in the debian mailing lists about a 4400/200: > > > > http://lists.debian.org/debian-boot/2004/03/msg05918.html > > > > You said that boot.img booted for you. > > > > How do you get this to boot? The only thing I've been able to boot on > > mine is the hfs-only image from woody. > > > > My install goes ok, but when I reboot, I can't get this to boot for > > anything. > > > > Did you have any luck getting a system up on your 4400? > > The sarge images are at : > > http://people.debian.org/~luther/d-i/images/daily/powerpc/floppy/ (2.6 > kernel) > > http://people.debian.org/~luther/d-i/images/daily/powerpc/floppy-2.4/ (2.4 > kernel) > > for the daily builds, and : > > http://people.debian.org/~luther/d-i/images/2004-09-30/powerpc/floppy/ (2.6 > kernel) > > http://people.debian.org/~luther/d-i/images/2004-09-30/powerpc/floppy-2.4/ > (2.4 kernel) > > for pre-rc2 ones. > > Friendly, > > Sven Luther > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]